Search results

Anyone know of a reliable company to re-plaster my pool in the Naples, FL area. I have contacted 3 local companies, 1 Supplied quote, but won't answer e-mail questions.. 1 Came out and measured and stated I would have quote in a few days, not heard from in 3 weeks. 3rd company came out and...

I didn't repaint. A lot of the screen / aluminum companies will repaint. I just replaced all the screws with "Blue Tap" screws Florida Fasteners Direct - Pool Cage Fasteners Screws. Cleaned with bleach / Surfactant solution. I replaced screen on all the walls and had screen contractor do...

I think without the screened enclosure, you will find it will take some extra work to keep pool maintained. I have redone my pool enclosure. Replaced all the rusted screws, cleaned and then re-screened. I replaced all the screws with a nylon head screw. Made a huge difference in appearance...

I wonder if drilling a few holes and a spray type expanding foam to fill void would work?

Wouldn't the lowest object were it stopped leaking be it?

The parts you are holding in your hand are what i call the stem and packing nut. The whole valve is a gate type valve. If you could find the manufacture name on the body, you may be able to find parts at hardware store or plumbing supply. I think the cheapest and easiest is going to just get a...

Florida Power and Light will put a whole house surge protector on. I believe they charge something like $9.00 per month and guarantee against surge. Covers pool pump. (just an option) I run mine at 1200 rpm for 8 hours a day and cost just under $1.00 per day.

I have an overflow that basically looks like a return jet, but is piped outside the deck area. At the end of a pipe is a 180 bend that can be adjusted to set the level of pool water.

Wow, looks pretty bad. Is this in a enclosed pump room? Is the case grounded?

I am no pool expert, but I am guessing the electrical conduit travels outside the pool deck to a junction box above water level. This way inside conduit would normally be wet. The key here is the outside surface of the conduit should have a good seal to the pool structure or tile.

I have vacation home in Florida that we use about every other month for a week at a time. Had no real choice but to hire a pool service. Just have to find one that is willing to use your method and have a mutual understanding of maintenance. I use a small one-man and wife pool company and works...

Tubing is not normally placed over a barb fitting unless it specifically for that purpose. (barbs differ) I am assuming that's a check valve in your picture. the barbs on those are really meant for a softer material like hose. The black tubing in your picture looks like polyethylene which is...

Brian, Programmed your method and all seems well. Yes, I have pool light but it's currently controlled by a switch inside house. I will move light circuit over to Easytouch panel soon. Just had to get replacement pump and panel up and running first. Thanks everyone for the ideas.

Brian, Ok, I believe I understand just create 2 overlapping schedules. The Pool Circuit basically keeps SWG relay on entire time. Pump switches speeds at feature schedule. Thanks I will give it a try.

I looking for some programming help with the Easy Touch Panel. I would like to run pump at say 2500 rpm for so many hours while also powering Intellichor. Then run at say 1400 rpm for another 6 hours also running Intellichlor. I have a Intellflo pump with the correct speeds entered...

Re: Doheny's Discovery, S200, Active20, Triton owners club Another post that we cost me a bunch of money.

I was looking at the Pentair equipment. Looks like if you go with their SWG, best would probably just add the Easytouch control.

I have purchased a vacation home in Naples, Florida with a IG freeform Gunite / Plaster Pool. Pool was built in 2005,is totally screened with basic cartridge filter with single speed pump. No automation or special equipment. Pool was inspected for basic condition and functional equipment and...