Search results

Without the vacuum hose I mean Sent from my SM-N910V using Tapatalk

Also have you ever tried just running the skimmer? To see if it it has the same results with pulling air? Sent from my SM-N910V using Tapatalk

Shorter the distance from the pump the stronger the suction. If you'd like to add a vacuum side from the female you surely can, just remember you'll have to prime that with a a hose or whatever before starting the pump Sent from my SM-N910V using Tapatalk

Are you pulling bubbles or is it just not priming all the way? If your pulling bubbles (new hose) like you said if it has holes in it anywhere it's going to slow the Suction from the vacuum heag Sent from my SM-N910V using Tapatalk

Your return lines should only be hooked up to a jet outlet. Your suction side should be hooked to either a main drain and/or skimmer Sent from my SM-N910V using Tapatalk

Are you making sure to plug all your other suction sides while vacuuming? Sent from my SM-N910V using Tapatalk

If you have room you could cut and put a 45° on it. Sent from my SM-N910V using Tapatalk

If you have any plugs you can plug it to increase flow Sent from my SM-N910V using Tapatalk

This is completely incorrect Sent from my SM-N910V using Tapatalk

Just do yourself a favor go to the pool store that will test your cell and a water sample. Have them test the water sample first. If the salt is on par with your board the cell is probably good. If not have them test the cell. Don't do unnecessary steps Sent from my SM-N910V using Tapatalk

But your salt cell could also still be bad and be giving a good reading on salt but not generating. Seen it multiple times Sent from my SM-N910V using Tapatalk

Yeah if you have a salt tester and the salt diagnostic of the board is (-2500) and the salt tester says 2500 you don't have to get it tested. 9/10 people don't have a salt tester and an aquarite board Sent from my SM-N910V using Tapatalk

If the problem still occurs the salt cell is bad, most pool stores can test them.. (Pool technican for 4 years) Sent from my SM-N910V using Tapatalk

The check salt and inspect cell will come on if salt level is below 2500ppm add more salt till 3000ppm and recheck Sent from my SM-N910V using Tapatalk

Does the chlorine seem to dissappear quickly? Sent from my SM-N910V using Tapatalk