Search results

Ok so the pool store called and it is the spider gasket and something with the handle as well. So they could rebuild it for 85 or get me a new one for 120. I chose to get a new one for 120 and it will be here in 3 days. Thanks for all the help.

I took my valve off and brought it to my local pool place where they are actually very knowledgeable. They said they are 99% sure it is some problem with the valve. Possibly the spider gasket, if I even have a removeable one. Or possibly the whole valve is bad. The issue is that the pool is set...

Ok so the last time I put chlorine in was about 18 hours ago. I just checked it and it is still at very close to 14, so I highly doubt the chlorine is a problem. I will try some DE today if I can get my hands on some.

K thanks!

Thanks I will try the DE tomorrow and repost.

Also how do I tell if the spider gasket is bad or not? Would that cause my problem of the filter not trapping particles? And as far as I can see there is not any sand being blown back into the pool through the return line.

Ok thanks for all the help so far. I am still having a hard time believing that it is not a problem that I have NEVER had the pressure rise in my filter tank yet all year. Does anyone here have any explanation for that? Thats what I really want to know and truly believe will fix my problem. It...

Is it hard to replace a spider gasket? I will look that up later I guess. Just rechecked the pool water pH 7.3 went up cause of all the chlorine free chlorine 14, and I did not have to add any total alkalinity 80 CYA 35 So I added about 1 gallon of chlorine around 4 hours ago, haven't lost...

Ok u got me, what is a spider gasket? And could that cause the problem I am having? Also could we agree now that this IS A FILTER ISSUE and not a CHLORINE ISSUE?

Yes and I actually put a brand new pressure gauge in 2 days ago just in case!

No it is set to filter, but it seems like it is just recirculating. Could my valve be bad? As I said it is not leaking and all the positions seem to work fine, but it does seem as though the water is just recirculating, even though it is set to filter. That is what I think the problem is, but...

I replaced the sand 4 days ago with 175 pounds of filter sand. The laterals looked fine and the tank looked fine as well. There was no channeling in the old sand, but since I had it open I replaced the sand anyway. New sand is 4 days old and still no difference, and pressure has not risen. Not...

The pressure has NEVER risen above 6-7 psi this year. That is why I posted here because I can't understand why the pressure will not rise in the filter tank. Usually it will rise to about 12-16 and I backwash and all green water comes out. NEVER happened this year, even after brand new filter...

Just tested free chlorine is at almost 14. I test again in 4 hours and add more of needed. I will do this for the next few days and let you guys know how it goes. I highly doubt this will make any difference, but I hope you guys are correct!

I have a TF100 test kit and a 24 foot round above ground pool with a 19inch sand filter with a 1hp pump. It is about 12-13000 gallons.

Just once per day. I will try to keep it at this level all day for the next few days and see what happens. I have NEVER had to use this much chlorine before, not even close, and I have had pools for the last 20 years, I am not new to this. This particluar pool I have had for 7 years You guys...

Thanks for the detailed reply, but as I said my CYA level is 25-30 and I had my chlorine level between 10-12 for about 10 days using 12.5% liquid sodium hypochlorite.

Thanks for the replies guys. I am pretty sure I already slammed my pool. For 14 days the free chlorine level was at about 10-12 and my cya is at about 25-30. From what I read on this site that is what is required. I used liquid sodium hypochlorite 12.5% to achieve the shock level. It took about...

Also I forgot to add that I have brushed the pool every day with the filter running. Why wont my filter catch the cloudiness in the water? That is the problem I am sure. As I said, every year previously, the filter would catch the debris and it would be backwashed out. This year, nothing has...

Thanks for the reply, but I have used this method for 7 years and it has always worked fine. Nothing with the water is different this year, but it is not working. Actually the water was more clear when I first opened this year than last year. I have always used algeacide 60 and it has always...

Hi everyone, I have had this pool for over 7 years with no problems. It is a 24 foot above ground pool. Every year I never have any problems, the pool is usually brownish when I first take the cover off. Then I always put algaecide 60 in it, and use powder shock to raise the free chlorine level...