Search results

Not yet, I haven't yet been able to get my hands on a spud wrench. I will likely end up going with the hacksaw approach. Also waiting a bit for the weather to turn as the pool is pretty Dang cold right now. The leak is better now though :-)

Great, thanks everyone for all the amazing help!

Thanks @jimmythegreek and @wireform. Jimmy, you were right, I didn't realize there is a gasket under the liner as well as on top. So all the holes weren't lined up as you said. The fitting cover hole, the outer gasket hole, the liner hole, the inside gasket hole all shifted away from the screw...

Thanks guys, to clarify, the screws aren't stuck in the 4 holes around the fitting. It's the plug that's stuck which is a separate issue from the screw issue. The screw issue is that I'm not able to get the screws back in to get the intake fitting cover back on to stop the water from leaking...

Thanks @Texas Splash and @jimmythegreek! Yes I'm still at it. Let me clarify a bit. The reason I included the photo of the sawed plug was to see if anyone has any ideas for a square tool to fit into the middle of the plug to turn the plug from the inside since the front broke off. The photo...

So I am opening the pool and one of my return plugs got stuck and I made a bit of a mess of things... The plug would not unscrew and I ended up cracking it and the top broke off. I removed the return fitting so I can better grab the plug to get some leverage. That was a mistake because now the...

Ok, I'm now sure that this "mystery line" is going to my main drain and is used to keep the skimmer water level up even if the pool water level goes below the skimmer. So I've plugged the other skimmer port (after blowing it) which is the suction line that feeds the pump and I have put in my...

Yes, I suspect the line is the floor drain as well. I am using a 1.25 HP Wet/Dry Vac to blow the pipes and it's done a great job with all lines other than this drain line. The previous pool owners left this wet/dry vac in the pool shed, so it seems they have been using this to blow the pipes...

This will be my first time closing my in-ground pool and I am having one line that I'm not able to blow out with my shop vac. This line is one of the two pipes that are at the bottom of my skimmer (there is only one skimmer). I have drained the pool below the returns and I blew out all return...

I recently moved into a house with a vinyl pool liner and after doing some troubleshooting, it seems I have a leak. I did the bucket test and taped the waterline on the skimmer to see the water loss and it seems that I'm loosing about an inch of water a day. Today I tried some dye tests but no...

Ok, thanks! I have been looking into liquid chlorine/bleach and will be giving that a try and will keep my chlorine pucks for the future if I ever need a bump in my CYA. I'm still confused on whether or not I should shock once my refill is done. I bought a tub of shock that has 65% Calcium...

I used a k-2006 to test the CYA and the pool store test confirmed it. So what should I use instead of the pucks? I just bought a huge tub of them...

So I just completed a partial drain and refill because of a very high CYA level. I drained about 45% of the pool. I want to make sure I will get things right this time to avoid getting a high stabilizer level again as it's a real pain to get it back down. So the pool is still blue, it has...

Sooooo, good news, I woke up this morning and the liner has reseated completely. Almost exactly how it was, just a few tiny wrinkles that I can most likely work out with a plunger. I thought I was going to have to spend the whole week on this one... Thanks everyone for the great advice!!!

Yes, I'm pretty sure there is water behind the liner now. Does that mean that is a hole in the liner? If there is water behind the liner, is there a way to drain it?

I left just under 2 feet in the shallow end to be on the safe side but I guess I should have left more. Filling now... Sent from my iPhone using Tapatalk

I have been doing a partial drain and I just noticed that in my deep end the liner has moved significantly. I am not sure if this is normal and when I refill it will go back to normal. I have stopped draining the water and have just started to refill the water. I have attached a photo, is this...

Ok, will try all of this, thank you! The source of this discolouration seems to be glue that was used in this spot by the previous owner. I'm wondering, if all else fails, is there something that can be used to cover it up? Underwater paint or something to that extent?

I have not, nor do I really know anything about them. If you can give me any hints to push me in the right direction on how they work or what brands to look for, that would be appreciated. Thanks!

I am in the process of doing a partial drain to lower my stabilizer levels and I'm thinking this is a great opportunity to cover up some nasty staining that I have on my plastic stair entry to the pool. I have attached a photo showing this yellowish discolouration. I have tried to clean this...

Thanks for the replies! It seems like the fireman switch is the way to go. It does work with the Intermatic timer I posted the photo of in my post above right? So to clarify, the fireman switch is wired to bypass the power switch of the heater? So I would wire it just after the power switch...

Recently bought a house with a pool and the heater needed work. I had a guy come to add a new pressure switch and on/off for the heater. He also mentioned that I need to make sure to turn the heater off at least 5 minutes before turning the pump off. So I'm confused because I have an...

Thanks so much for the explanation. Very clear and informative. Sent from my iPhone using Tapatalk

Thanks for the reply, I have added a signature with my pool info as well as my location in my profile. Any advice as to what I should do to get things balanced would be appreciated. Regarding the chlorine chart, so what I'm understanding is that having a high chlorine level of 13ppm is not...

Yeah my mistake, I meant CYA, what should I do about that high reading? About the FC, it's taking a long time to go down, it's been about a week and a half. It was 14.5 at pool opening. Should I try a chemical to quicken things up so I can swim? What FC is safe to swim? Sent from my iPhone...