Search results

  1. C

    Loose Diving Board Repair?

    I have a 25 year old diving board embeded with 4 legs into my concrete pool deck. No idea how old the concrete is - it's in marginal shape at best. Last summer the diving board started getting loose on the back 2 holes. If an adult goes to the end of the diving board the back end lifts up...
  2. IMG_4859.jpg

    IMG_4859.jpg

  3. IMG_4858.jpg

    IMG_4858.jpg

  4. C

    repair leaking pipe from skimmer

    Anything come of this? Sounds similar to my situation.
  5. C

    Suction side leak - back pressure temp fix?

    I just realized I can hear cavitating in the grass about half way back to the equipment. If I lay down and put my ear to the ground - don't ask how I figured this out :) I don't think there are any couplings, but who knows. Maybe the previous owners broke the line digging or something. It...
  6. C

    Suction side leak - back pressure temp fix?

    If I break the skimmer, I need to replace the vinyl liner right? We just replaced it a few years ago, so I really don't want to do that! If I cut into the concrete further away, then carefully dig towards the skimmer would that be ok, or would I need to cut concrete right at the skimmer...
  7. C

    Suction side leak - back pressure temp fix?

    OK, I did the follow. 1) Turned off pump 2) plugged port from skimmer to pump at the skimmer (with the winter plug) 3) took lid off pump basket 4) I also, put the sand filter to waste and removed the pressure gauge relieving seal in the sand filter. I was thinking back pressure could create...
  8. C

    Suction side leak - back pressure temp fix?

    I have never put pucks in the skimmer, but we only bought the house 4 years ago, so who knows about the other 26 years :) So if I follow, you are suggesting I: - turning off the pump - plugging the line from skimmer to pump at the skimmer - take lid off pump and watch water level. If it goes...
  9. C

    Suction side leak - back pressure temp fix?

    OK, that's encouraging then. I'm pretty sure it's not leaking water, for sure not significantly. I'll check the o-rings on the pump drain ports.
  10. C

    Suction side leak - back pressure temp fix?

    Not that I'm aware of... If its losing water its very small. This time of year I top it up occasionally, but in the spring when its cooler it seems stable. The pump is on an automatic timer so its off 1/2 the time.
  11. C

    Suction side leak - back pressure temp fix?

    Yeah, I can try again... I only have a small section of pipe coming out of the ground, hard plumbed into the pump. So there aren't a lot of options, but admittedly the connections are 30 years old. I couldn't find a leak, but maybe I should just redo the above ground plumbing... I did...
  12. C

    Suction side leak - back pressure temp fix?

    I plugged off the main drain port in the skimmer. Sadly, no change.
  13. C

    Suction side leak - back pressure temp fix?

    Nope, but I can for sure. Would that indicate an air leak in the main drain? I'll try now.
  14. C

    Suction side leak - back pressure temp fix?

    My pool has a main drain that goes into the skimmer. Like the diagram attached. But I only have 1 pipe from the skimmer to the pump. It's all plumbed directly to the pump with no diverters or unions anywhere at the pump. Its old... 1980s.
  15. skimmer-diagram.jpg

    skimmer-diagram.jpg

  16. C

    Suction side leak - back pressure temp fix?

    Two pronged question here... I've followed all the usual steps to try and locate a suction side leak. No luck. 30 year old pool, 1 skimmer line to Hayward superpump to sand filter. I've had air bubbles on and off for years. Could never find a fix, so just ignored it. Recently my heater...
  17. C

    Pool Opening - Short Term With No Pump?

    I just replaced my vinyl liner. When doing the work we found some problems/cracks in my fibreglass steps. The liner has been put in, and water filled up to acceptable level (~60% full) to hold it in place, but still below the steps so we could work on them. I had a fibreglass guy come in to...