Search results

How does the cover plate come off of the Jandy Truclear to change the battery? I tried unscrewing the screws on the outer cover and the cover would not come off.

I have just discovered that the Jandy Tru Clear 11ku 35k does not keep adjustment settings for chlorine without an automated system. Has anyone discovered a way around this on any SWG? After starting every day, I have to manually adjust down to 60-70% so that my SWG does not over chlorinate -...

acrylic deck sealer

I use the TFP test kit for SWG and the salt tester....the results I had were weird as I hadn't changed anything in the pool. I all of sudden needed 30+ lbs of sodium bicarbonate and 15 lbs of stabilizer and I could not figure out why as I have been going along great for years. I went to the pool...

...changed signature - tx! Is there a way to test a SWG production? It has listed on the description 420 grams of produced daily. If I am running 24 hours is it possible to test it for productivity? I appreciate all advise and thank everyone who has taken the time to post!

Thank you! I was told it was a 40k model and believed it. I brought the chlorine up to 15 ppm and thought that it would be enough for the swg to keep up with, but apparently not. The voltage checks out so I guess Ill have to go with the slam. Thanks again.

My pool guy isn't keen on looking at a problem because the machine isn't sending out any error code. I just have low chlorine and a cloudy pool. The system is 8 months old. My installer said he talked to Jandy and he has a way to test it now that I've complained for weeks on end trying to get...

I can check amps...thanks!

My pool installer talked to the Jandy rep and was told if it is over on salt it is not an issue. There are no error codes so my pool guy keeps saying my chemicals are off. Yes I used a K-1766 salt tester. Thanks!

100%

In mid-Florida downpours of rain have been swamping our pool. I can understand that my pool gets out of balance, however I have not been able to have it stay in balance at all. My pool is cloudy and have my SWG running 24/7 because my SWG installer believes his equipment can't be faulty. I had...

Thank you for so many helpful tips! I can now add a working signature :cool:

I've slammed my pool according to CYA/Chlorine Chart wity CYA around 50 for a SWG and would like advice for further maintenance... *My pool isn't exactly square nor round nor oval...it could differ between 13,000 and 23,000 per calculations; 20'Wide 30'Length Approx. 3' Shallow and 7' Deep end...

Awesome to know! I wasn't sure if higher cya would hurt cell and now I know. Thank you!!!

Thank you!!! My SWG recommends 30-50 ppm on CYA - would I follow the chart to slam for non-SWG i.e.: CYA (Stabilizer) Minimum FC Target FC Shock FC 40 3 5 16 50 4 6 20

I am trying to dial in a correct swg resulting in a good maintenance for this summer. This is the second year I've owned it and I am struggling to stop green algae. Located in Tampa Bay, FL., near a very large oak tree (I remove debris daily) and full sunlight. 13,000 gallon marcite pool...