Search results

The 2 orings on the pressure relief valve on the hayward pro gris de filter . I have been just buying the assembly , cant find the o-rings ??? Thanks for any info !!!

We are getting a intermitttent Low salt light. Salt is ok at 3900 used salt strips , my salt meter and took sample to the pool store. All about the same readings. When the Low salt light comes on the unit goes into a low production mode. I have been adding liquid clorine to keep it going...

Does a SWG produce more clorine at low flow rates ?? My RJ60 seems to be making a lot more clorine after I installed A VS pump. I had to turn it down to 20% , Guess I will really find out next month when it get's hot. It's a good problem to have!!!

Anyone know where to get o-rings for the big white home depot 2" unions I went to HD tonight looking for one, they don't sell o-rings !!! They had a 2" union ( the one with 2 threded ends ) but the o-ring is thinner.

I plan on doing a AA treatment to remove some iron stains, and then drain my pool for some general maintance. Last time I did the AA treatment I added 3 bottles of Jacks Magic Purple Stuff then drained and rinsed the pool and pumped out all the water. I want to know if I can not add the Jacks...

MY ProGrid D.E. Filter say's to add 9 lbs of D.E. ( sticker on tank ) The book say's 9 lbs also, I have read from many sources that say 72sq ft needs 14 lbs ??? Who is correct ???

I have a Hayward multiport and i need to order a new top half.. I wonder if the one on it now is even the correct one. The top half now just says hayward vari flo The lower half (body ) say SP-715A 50 It's a 2" D.E. Pool. Any body know the correct p/n for the new lid assembly ???? Thanks..

i installed a VS pump and having trouble with the circupool rj 60 cell only filling up 1/2 way with water at 70 % pump speed . I was thinking maybe my pump wasen't strong enough ( 2.5 hp ) but i just read a artical on another site where a guy has the itellaflo 3 hp and was having the same...

I have D.E flowing out of my filter as soon as pump is off. If i change the jandy valve ( suction before pump) to spa no issues as soon as i move it to pool d.e. Starts to fill pump basket when pump is off and goes into pool via the drain. Any ideas ???? Thinking maybe a underground suction...

Nice pump .. need info on run times ?? Any ideas , I have. 4:00pm-7:00pm. At 100% for krepley krawley 7:00pm-1:00am At 55% to filter Am i even close ??:salut:

circupool V3 VS Pump 2.5HP

i currently have a Hayward single speed 2 hp super pump. i want to replace it with a Pentair VS pump. Pentair 011018 IntelliFlo 3HP Variable Speed Pool Pump Ultra Energy-Efficient, 230V Does anyone know if the plumbing will fit up, or will i need to re-plum the 2 pipes.

Unit is still Working Good , I had too clean the cell Twice. the cell plate assembly slides out one end and i made a holder for it from a 4" pvc pipe with a cap on one end. To soak in the acid solution. Once in a while my over salt light will come on , but when i check it with my electronic...

Anybody know a good place to get these, They keep popping off!!!! Also is there any new style that can be made to retrofit these ( kinda like the ones on fiberglass spas ) Thanks for any info !!!

I just had a new Raypak heater installed and a check valve becuse i have a salt cell. Now my filter ( 1 year old hayward 72 sq ft ) pressure gauge stays at ten when i turn off the pump. If i open the relief valve ( top of filter ) it sucks air in and the gauge will go to zero. Is this correct...

getting a new raypak heater monday and have a question. My old rakpak just died after 19 Years of service !!!! I use TFP Recomendel levals for a SWG/ Fiberglass ( my pool is really gunite with fibertech surface ) I keep the Alkalinity between 60-80 My Raypak heater manual says Alkalninty...

I would like to get a 2 speed pump for the energy savings , I have a careTaker 99 in floor cleaning system and wonder if it wont function properly due to the lower pressures? Anybody using one ?

I have lot's of air getting in the pump when it on Pool mode. When i turn the valves over to SPA mode all the air goes away and the pump runs quite with maybe only 1 little bubble visable. The second i turn the section side back to pool bubbles lots of air and the pump kinda surges . I replaced...

My pump is surging and getting a lot of air in the basket .. When i switch the jandy valves to the SPA mode , it works perfect and in about 1-2 min. All air is out of the system , pump quiets down and runs perfectly. Switch back to pool and air comes back ????? Pump re plumbed new jandy 3 ways...

on the section side is sucking air, but when i turn it from pool to spa it stops sucking air. i replaced all the guts this summer , the diverter and oring kit. Could the housing be bad ??? The valve was installed in 1998 , is that past its life expectency ? Thanks...

The pump unions for my 2" hayward RS2000 pump. I found the kit listed as RS750kit and also Hayward 41021. i dont need the pump base , just the unions .. Thanks for any assistance..

i just installed a brand new intermatic PF1102T. the clock is not running on it . i can turn it on and off manually , and pool SWG Heater and pump work fine. The time in the window never changes. i measured the voltage at the 2 pins on the side of the motor and i have 110 volts on each pin...

New Hayward ProGrid filter says to tighter the band bolt to 150 inch pounds. There are no springs over the bolts like the old filter had. I was looking for a tourque wrench and the ones i can find are all foot pounds . I think 150 inch pounds is around 12-14 foot pounds ? The wrenches i found...

My 15 year old Crystal Clear II D.E. filter DELE42058. Stainless tank Has a pinhole on the top !!!! What the heck ... So i guess i will be needing a new 72 sq ft D.E. Filter .. Any recomendations ??? Is hayward still good , there running 1200.00 bucks. I dont know how stainless that thick...

Just a quick question , i replaced a leaking pump seal and when i put the pump back togther , the difuser did not snap back on the seal plate like they show on the youtube video . I just kinda crammed it all in and it works and no leaks , is it a problem that the difuser did not snap onto the...

I have a intermatic t104m201. From 1983. 220 volt It still works ok !!! But the box is rusting out , door seal is long gone. And the switch is wearing out. i really want a timer with freeze protection. Now that i have a salt cell to worry about. Any recomendations for a freeze protection timer...

Anybody had that happen ?

Warped pump strainer lid on a Leslies ( hayward RS2000 pump ) The pump got hot last year from failure to prime it's self. This pump has big screws with knobs the tighten on ears on the lid . When it got hot the pressure warped it very slightly but enough to suck air. Been chaseing the leak for a...

TF-100 instruction card says Alkalnity for SWG should be .. 70-90 Pool School says...60-80. ( SWG, Fiberglass ) Iam at 90 ... Why is there a difference and whtch one should i use ?? Thanks...

I got a stripped screw !!! On my Jandy valve I think it's leaking air! Is there a good fix !! Other then replacing valve ?? Thanks ....