Search results

My RP2100 Raypak heater will not kick on. The pilot light is lit and when I turn the temperature gage, i can hear it click at the low temperature. Is there something I should check to see why it isn't kicking on? At the beginning of the season, it took awhile to go on, but it finally did...

I have a yellowish rusty stain in a few spots in my pool on the walls. It is a ganite, 20K gallon pool, newly finished last year. All the chemicals are testing correctly and also tested correctly at pool store, and pool is very clear. I tried the Mustard Algae solution from the pool store...

Trying to light the pilot light on my Raypak RP2100 pool heater. The pilot light know will not move from the off position. I can push down on it, but it won't turn to "pilot". Propane tanks are on and pool filter is running. Is there something else I need to do or check? Thanks in advance.

My propane company lit the pilot light and the heater won't start. They said the millivolts are fine, the thermostat won't close and gas volve will not open for main burners and I need a new thermostat. Someone mentioned that there may not be enough pressure from the filter. How do I know how...

I just had my in ground gunite pool redone this week. The person that did it replaced the screw for the light with a non stainless steel screw. I now have a stain above the light. I have replaced the screw with a stainless steel one, but any suggestions on how to get rid of the stain? Second...

I went on vacation a couple weeks ago and pool turned green with algae. I finally cleared it up after about 5 days. Now when I start the filter, it shoots green through the jet for about 30 seconds. I have a hayward DE Filter, in ground pool. I took the filter out and cleaned it all off and...

I have an inground pool w/ 240 volts running to the filter. I am trying to put in an automatic timer for the filter. I was given a Intermatic Timer T101R which is 120V. I cannot get it to work since it is not enough volts. Is there any suggestion for timers that would work to a 240 volt run...

I took a water sample to my local pool store, because no chlorine reading and green algae. The test results were as follow: Free Cholorine: 0.1ppm, Total Chlorine: 7.2ppm, Combined Chlorine: 7.1ppm, pH OVR 8.2, Hardness: 140ppm, Alkalinity 166ppm, Cyanuric Acid 15ppm, Copper 0, Iron 0. I was...