|
It is currently May 25th, 2012, 2:24 pm
|
 |
|
 |
|
| Author |
Message |
|
w2whitaker
|
Post subject: Replace a TCell 15 with a TCell 3?  Posted: August 21st, 2011, 5:29 pm |
Joined: June 21st, 2010, 3:35 pm Posts: 10
|
|
Need your expertise...
Currently have a 9800 gallon in-ground pool installed July '04 with Aqua Rite Electronic Chlorine Generator and a TCell 15
Looks like I have squeezed all the chlorine generation I can with my current TCell 15 and it's time for a replacement - Current Diagonstic Displays show - Cell Voltage = 30.3 Cell Current = 0.00 Desired Output % = 80P Instant salinity = -0.00 Product = AL - 2 Software revision level = R1.32
The "Check Salt" and "Inspect Cell" lights are on and have walked through possible solutions - but I think the cell is dead...So...trying to correctly size a replacement cell - and since I dont have a 40k gallon pool - Is it possible to use a TCell 3 (up to 15,000 gallons) instead of TCell 15 (up to 40,000 gallons)?
Will a TCell 3 be compatible with the controller/software?
Will there be a noticeable difference in performance...ie...cholorine generation...with the smaller cell?
Appreciate any insights, advice or help you can provide.
|
|
|
|
 |
|
PoolGuyNJ
|
Post subject: Re: Replace a TCell 15 with a TCell 3?  Posted: August 22nd, 2011, 11:36 am |
| Special Contributor |
 |
Joined: May 20th, 2007, 4:29 pm Posts: 3053 Location: South Central NJ
|
|
Usually a can do situation but verify it with Hayward first as not all can.
Scott
_________________ Owner of - PoolGuyNJ LLC Expert Pool and Spa Repairs, Renovations, and Augmentation. Helping people decide what is the right gear for meeting their needs. Expectations Set, Expectations Met, No Surprises.
|
|
|
|
 |
|
Poolschoolgrad
|
Post subject: Re: Replace a TCell 15 with a TCell 3?  Posted: August 22nd, 2011, 1:02 pm |
Joined: October 4th, 2010, 8:51 pm Posts: 317 Location: Georgia
|
Won't work. You need software revision 1.5 or higher to use the low output cells. Even if you had this version, you would probably not be happy with a unit that produces 1/3 of the amount of chlorine that your current cell produces. If funds are the issue, then consider the GLX-CELL-15 which is the same cell as the t-cell-15 but with only a 1 year warranty. Before you purchase a cell, move the output % to 100% to see if the voltage, current, and instant salinity change. PSG
_________________ poolschoolgrad
20x40 free-form IG vinyl, 1hp Hayward superpump, Hayward pro grid DE filter, Raypak heatpump, Goldline Aquarite SWCG, Polaris 280 with booster, and tested using a Taylor K2006.
|
|
|
|
 |
|
w2whitaker
|
Post subject: Re: Replace a TCell 15 with a TCell 3?  Posted: August 22nd, 2011, 4:50 pm |
Joined: June 21st, 2010, 3:35 pm Posts: 10
|
Poolschoolgrad, Thank you for your response and I had contacted GoldLine tech support and they stated the same as your response. They did off a similar solution by removing a "Jumper Switch" connection on the control board that will make it compatible with a TCell 5 (up 20k gallons). Found this interesting option on Ebay - http://www.ebay.com/itm/Goldline-Haywar ... 5640e91a65
|
|
|
|
 |
|
Poolschoolgrad
|
Post subject: Re: Replace a TCell 15 with a TCell 3?  Posted: August 22nd, 2011, 7:48 pm |
Joined: October 4th, 2010, 8:51 pm Posts: 317 Location: Georgia
|
Excellent information as I was not aware that it only required removing a jumper to allow the main board to be compatible with the Aquatrol t-5 cell. The rebuild service may also be a cost effective solution. If you try this service, please post your observations and total replacement time. thanks PSG
_________________ poolschoolgrad
20x40 free-form IG vinyl, 1hp Hayward superpump, Hayward pro grid DE filter, Raypak heatpump, Goldline Aquarite SWCG, Polaris 280 with booster, and tested using a Taylor K2006.
|
|
|
|
 |
|
|
 |
|
 |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|