I have a 10K gallon pool in AZ. I use a combination of bleach, trichlor, and dichlor to manage the CL. I can’t solely use liquid chlorine because I am not there on a day to day basis. Here are my numbers from this morning:
FC=3
CYA<30
PH=7.6
TA=90
CH=240
I want to keep my PH in the 7.4-7.6 range, no higher, in order to minimize tile scaling. Almost always, when I get my PH down to my desired range, it rises back up to the 7.7-8.0 range within a couple days. Here’s my question….Should I lower my TA from 90 to 80 in order to see if the PH rate of increase will slow for me?
FC=3
CYA<30
PH=7.6
TA=90
CH=240
I want to keep my PH in the 7.4-7.6 range, no higher, in order to minimize tile scaling. Almost always, when I get my PH down to my desired range, it rises back up to the 7.7-8.0 range within a couple days. Here’s my question….Should I lower my TA from 90 to 80 in order to see if the PH rate of increase will slow for me?