Replaced an old cell that was showing low salt and planning on cleaning it as a backup in case it has life. Will try to reinstall after checking salt levels at Pool Store.
Installed new cell and it is currently showing 6,400 ppm (checking actual salt levels next), but have added plenty of water and almost running pure water now through the filter - no change. Also reading 24.1 V and 10 amps when it starts.
Control Board is a Hayward ProLogic installed around 2012.
Thoughts?
Installed new cell and it is currently showing 6,400 ppm (checking actual salt levels next), but have added plenty of water and almost running pure water now through the filter - no change. Also reading 24.1 V and 10 amps when it starts.
Control Board is a Hayward ProLogic installed around 2012.
Thoughts?