Hello, guys. My unit has stopped making chlorine. I did all the test steps I could find and to me it seems as if the 16084 power supply is shot, but before spending $$$ I would like to be able to confirm I need to replace the whole thing. I'm a retired electrician, able to troubleshoot, but I can't find any info as to what voltages I should be looking for on the board. Cell is less than 4 years old.
Here is where I'm at: Readings are the same before and after the boost/force reverse test. Salt 3400, temp 87, volts 0, amps .6. Error mssage Low Amps Cell? All fuses read good and I cleaned contact surfaces. I read zero volts at the board side of the cell cable. Is there any other test or reading I can take to determine what's wrong? I appreciate any helpful experience you can offer.
Here is where I'm at: Readings are the same before and after the boost/force reverse test. Salt 3400, temp 87, volts 0, amps .6. Error mssage Low Amps Cell? All fuses read good and I cleaned contact surfaces. I read zero volts at the board side of the cell cable. Is there any other test or reading I can take to determine what's wrong? I appreciate any helpful experience you can offer.
