It is currently February 11th, 2012, 2:08 pm

All times are UTC - 6 hours [ DST ]



 Page 1 of 1 [ 6 posts ] 
Author Message
 Post subject: pool builder put 2 bottles of acid and now my PH is LOW
PostPosted: March 16th, 2010, 7:38 pm 
Registered User
User avatar

Joined: August 17th, 2009, 10:37 pm
Posts: 175
Pool builder put 2 bottles of acid in the pool yesterday (i found out today) I tested it twice and its at or below 7.0 (taylor kit). The plaster (pebble) is less than a week old. Should I raise the PH as the CSI now says corrosion likely or run the waterfall and airate (sp?).

Other readings-

PH- >= 7.0
TA- Dropped from 230 to 125
CH- stable at 310
CYA- 45- he needs to add more conditioner



_________________
18,900 Stonescapes Tahoe Blue xtra black, 8 jet Spa, Pentair inteliflo VS , Pentair FNS 60 DE, Inteliclor40, Pentair 400,000 Mastertemp heater, 3 spillovers powered by a Pentair 1 HP whisperflo pump, The pool Cleaner, 2 Intellibright color changing lights and 400 sq ft. of Heliocol roof mounted solar.
Offline
 Profile  
 
 Post subject: Re: pool builder put 2 bottles of acid and now my PH is LOW
PostPosted: March 16th, 2010, 7:41 pm 
Special Contributor
Special Contributor

Joined: May 20th, 2007, 2:59 pm
Posts: 11039
Location: SWSuburban Chicago, IL
Leave it. The PH will rise rapidly on its own at first from the new plaster.
Also, no more CYA for a while, you can't use the SWG for the first month so there is no reason to increase the CYA right now. Use bleach or tablets for your daily chlorination during the first month.

Hope this makes sense...



_________________
TFP Moderator
Helpful links: Pool School; The Pool Calculator; CYA/Chlorine Chart
24' round AG pool, 52" high, Laars "lite 2" heater; Waterway 2 spd Pump;
150 Sq ft. Clearwater Cartridge Filter; Former and DISSATISFIED "Pool Frog" owner
NO LONGER FRUSTRATED thanks to TFP.com
www.PerfectlyClearPoolService.com
Offline
 Profile  
 
 Post subject: Re: pool builder put 2 bottles of acid and now my PH is LOW
PostPosted: March 16th, 2010, 7:57 pm 
Site Admin
Site Admin
User avatar

Joined: May 7th, 2007, 3:03 pm
Posts: 22094
Location: Silver Spring, MD
frustratedpoolmom has it right. Adding acid not long after plastering is called an acid start. You should allow the PH to rise on its own, which will happen fairly quickly. You don't want to start trying to balance TA or CH for at least the first three weeks after plastering. PH, TA, and CH will all rise as the plaster cures. This will happen fairly quickly for the first three or four weeks, and then much more slowly for up to a year.



_________________
19K gal, vinyl, 1/2 HP WhisperFlo pump, 200 sqft cartridge filter, AutoPilot Digital SWG, Dolphin Dynamic cleaning robot
TFP Admin. Creator of The Pool Calculator. Other handy links: Support this site, TF Test Kits, Pool School
Offline
 Profile  
 
 Post subject: Re: pool builder put 2 bottles of acid and now my PH is LOW
PostPosted: March 16th, 2010, 8:47 pm 
Registered User
User avatar

Joined: August 17th, 2009, 10:37 pm
Posts: 175
Thank you! I feel like a new parent. I freak about every unknown. Ill post some pics soon. It turned out great.



_________________
18,900 Stonescapes Tahoe Blue xtra black, 8 jet Spa, Pentair inteliflo VS , Pentair FNS 60 DE, Inteliclor40, Pentair 400,000 Mastertemp heater, 3 spillovers powered by a Pentair 1 HP whisperflo pump, The pool Cleaner, 2 Intellibright color changing lights and 400 sq ft. of Heliocol roof mounted solar.
Offline
 Profile  
 
 Post subject: Re: pool builder put 2 bottles of acid and now my PH is LOW
PostPosted: March 16th, 2010, 9:07 pm 
Registered User
User avatar

Joined: September 28th, 2008, 10:09 am
Posts: 61
Location: Left coast
Did your PB tell you to brush your pool. They told me to brush everything once a day for about a week, its suppose to bring out the colors better.



_________________
16,500 gal Roman end with PebbleFina finish
4 x 160 intelliflo pump
Easytouch controls with an IC40 chlorinator
Sta-rite cartridge filter
A & A infloor cleaning system
Pentair 5g LED pool light
Offline
 Profile  
 
 Post subject: Re: pool builder put 2 bottles of acid and now my PH is LOW
PostPosted: March 16th, 2010, 10:42 pm 
Registered User
User avatar

Joined: August 17th, 2009, 10:37 pm
Posts: 175
yep! I and I have.



_________________
18,900 Stonescapes Tahoe Blue xtra black, 8 jet Spa, Pentair inteliflo VS , Pentair FNS 60 DE, Inteliclor40, Pentair 400,000 Mastertemp heater, 3 spillovers powered by a Pentair 1 HP whisperflo pump, The pool Cleaner, 2 Intellibright color changing lights and 400 sq ft. of Heliocol roof mounted solar.
Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 6 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  


TroubleFreePool.com The Web