It is currently May 25th, 2012, 8:13 am

All times are UTC - 6 hours [ DST ]



 Page 1 of 1 [ 5 posts ] 
Author Message
 Post subject: Pole & Hose Hangers
PostPosted: May 7th, 2010, 10:53 am 
Registered User

Joined: May 4th, 2010, 9:28 am
Posts: 70
Location: Lehigh Valley, Pennsylvania
Anyone have any ideas on where to get or the best option for a pole and hose hanger for an aluminum fence? I was hoping to find something that hangs over the fence rather than screw into the fence posts. Posts are kind of narrow so I thought a hanging hook would be better. Been unsuccessful in finding anything to date.



_________________
25K gal vinyl inground, 1HP Hayward Pump, Hayward DE 4820 Filter
Offline
 Profile  
 
 Post subject: Re: Pole & Hose Hangers
PostPosted: May 7th, 2010, 11:30 am 
Lifetime Supporter
Lifetime Supporter
User avatar

Joined: April 8th, 2007, 11:47 am
Posts: 1553
Location: Waaay NW MN
Ha! We went to the lawn and garden department and found the "over the deck" plant hangers that have an angled/squared top with a rounded "loop" on the bottom - all of our skimmer, leaf rakes, cleaner brushes, extra hoses, etc. hang from these. Wally World for just a few dollars!



_________________
18x33x52 Buttressfree Seaspray (Wilbar) AGP - 1.5hp Pentair Maxim w/22" Pentair Meteor Sand Filter, Aqua Rite SWG System, Biltmore Walk In Steps - 2/4x20 Solar Panel Setup - Pool Rover Jr - finally hard plumbed the whole darned thing -
Beats Driving to the Lake!
Offline
 Profile  
 
 Post subject: Re: Pole & Hose Hangers
PostPosted: June 4th, 2010, 6:57 pm 
New User

Joined: June 4th, 2010, 6:54 pm
Posts: 1
I have a vinyl fence, but had the same issue because I don't want to screw into it. I purchased clear plastic door wreath hangers. They're very inexpensive and can be moved around easily. We use them to hang poles, nets, bathing suits, towels, etc. Very useful.


Offline
 Profile  
 
 Post subject: Re: Pole & Hose Hangers
PostPosted: August 1st, 2011, 11:53 am 
New User

Joined: July 25th, 2011, 3:34 pm
Posts: 6
I really appreciated this post. I am always looking for inexpensive ways to do things like this while it not looking like a duct tape remedy.
:-D



_________________
18x36 IG Steel Wall Vinyl 25K gallon 3.5-8ft, Hayward 4820 DE Filter, Hayward 1HP Super Pump, Hayward 250K BTU NG heater, Zodiac Baracuda MX8 Cleaner, 4 jets (steps/deep), 1 return
30 mins North of Pittsburgh Pennsylvania
Offline
 Profile  
 
 Post subject: Re: Pole & Hose Hangers
PostPosted: January 30th, 2012, 11:02 am 
Registered User

Joined: July 2nd, 2011, 8:31 am
Posts: 142
Location: Broken Arrow, OK (Tulsa)
I'm in the same boat here...just had our pool completed and fence/sod installed. Now we need to hang the pool pole, etc. on our new aluminum fence, and I don't want to screw into it.

Could anyone provide a link to what they're using to hang their pool poles with....pictures would be great!



_________________
16 x 31, Approx. 12,000 Gal Freeform IG pool; Flagstone coping; Quartzscapes Super Blue plaster finish; Tanning ledge w/2 bubblers; 1 HP Pentair Whisperflo pump, Pentair sand filter; (2) Pentair Intellibrite LEDs w/controller; Easytouch8 w/IC-40 SWG; Salt finish concrete decking.
Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 5 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  


TroubleFreePool.com The Web