It is currently May 25th, 2012, 3:30 am

All times are UTC - 6 hours [ DST ]



 Page 1 of 1 [ 4 posts ] 
Author Message
 Post subject: Need new pump
PostPosted: January 31st, 2012, 4:44 pm 
New User

Joined: October 20th, 2009, 9:46 am
Posts: 12
Location: Cumming, GA
replacing a Jandy MHP2.0 that is currently running my spa jets.

i have 3 of the same pumps on the system - Filter pump, water feature & the jets. should i move the filter pump to replace the jets pump and then get a new variable system for the filters? if so, will it work with my AquaLink RS8 (with just led lights)? if so, what would you recommend.

thanks.


Offline
 Profile  
 
 Post subject: Re: Need new pump
PostPosted: January 31st, 2012, 5:25 pm 
Special Contributor
Special Contributor
User avatar

Joined: May 3rd, 2007, 9:45 am
Posts: 3405
Location: Pleasanton, CA
Depending on what you pay for electricity and if the power company gives rebates for a VS, going with a VS may not be your most economical choice. You may have several other options:

1. Swap out the filter motor to a two speed and move the single speed to the spa.
2. Swap out the filter motor and impeller to a lower HP two speed and move the single speed to the spa.
3. Purchase a new 2 speed pump.



_________________
Mark

18'x36' 20k gallon plaster/gunite pool, 1/2 HP 2sp pump, Aqualogic PS8 SWCG, 420 sq-ft Cartridge Filter, 450 sq-ft EPDM Solar Panel, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater
Hydraulics 101; Pump Ed 101; FSEC Solar Panel Information
Offline
 Profile  
 
 Post subject: Re: Need new pump
PostPosted: January 31st, 2012, 7:00 pm 
New User

Joined: October 20th, 2009, 9:46 am
Posts: 12
Location: Cumming, GA
I'm in GA and no rebates as far as I know.

Will the 2 speed pumps work on my controller or will I need to upgrade. I do have an open relay but was planning on adding landscape lighting to it.


Offline
 Profile  
 
 Post subject: Re: Need new pump
PostPosted: January 31st, 2012, 11:30 pm 
In the Industry

Joined: January 24th, 2012, 12:21 pm
Posts: 96
You would need a two speed relay



_________________
25K aggregate IG, Intellipro, FNS48, Polaris 360, PG2000 fiber optic light source
Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 4 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  


TroubleFreePool.com The Web