Recent content by wwhite0310

I was searching the wrong thing, sorry i should have closed this one.

I am moving my pool this weekend to surprise my wife and daughter while they are out of town and have been reading about using a foam board under the pool. I have the area rough graded today, was going to "box" the pool in add a layer of sand to get as level as possible and ten add this foam...

Can you send some instructions this way also?

Thanks, was just a thought..the deck is only like 6" off the ground also..so not a high deck or anything, but regardless I will be putting it next to it.

Ok, I just redid my deck with is 16.5x23.5..I had intentions of moving my pool from the other side of the yard to next to my deck. I had a friend over today who put a very good question in my head, why not put the pool on the back side of the deck. I know the deck could hold the weight, but has...

Here are a couple pictures of my setup lastyear. As you can see I used the old plunger valves and the 3 piece nut mod that I found here. I am moving my pool and am going to be completely redoing my hard plumbing and and trying to get ideas and tips so that I can get materials and start possibly...

Thanks for the close ups..those are different then what I have seen on here. Do they fit correctly on the pump/filter I assume. Got a list of parts you used by chance? I ask because this was the part that got me in trouble last year as I think I had too many different parts assembled trying to...

Can you take a close up of your connections at the pump and the filter. I have to redo my connections and yours look really clean.

Have they made any progress in the connectors from Intex to standard pvc? I was getting my pool ready to setup this weekend and forgot about my connectors and did not know if there is a site where there they can be bought.

try letting it backwash for at least 2 minutes..when i first got mine going that was what I had to do.

Re: What should come first...sand filter? Or SWG for 16x48 a x5 sand filter all the way

I had a big crack on my skimmer and I used clear indoor outdoor caulk..I put a big glob on and smoothed it out..let it sit a couple hours and repeated..I did this a few times..not a single leak.

When you vacuum on waste..there should be nothing going into the pool at all. It should all come out the waste port away from the pool. Can you take a picture of your multi port valve in the waste position?