Recent content by wolfson292

I took the CYA without diluting at had to estimate a bit as it was quite so high, and the scale is not linear. Only diluted for the FC test since the first time I was afraid I was going to use the entire bottle of reagent before it went back to clear. Was also not using tap water, but water...

Thanks for the tips. I am using a K-2006 kit, was just trying to save reagent with the high readings. I'll take the suggestion and turn off the SWG until things are back under control.

After reading more on this forum and being confident I did not need to pay someone else to maintain my pool, I installed a Nano Digital SWG and converted it over. I've run into one issue. My FC does not seem to be coming down from the crazy high level that the service company was keeping it at...

Thanks for the reply. After reading that other set of posts I was really hoping I had such a thing, but on the output side after the chlorinator is just the single automated Jandy valve. Now I could be missing something, so I'll get some pictures posted today.

After a lot of searching I found this thread: inline-water-heater-for-spa-only-t17863.html This basically answers my question. Letting some of the pool water run into the hob tub is the preferred method, and to only heat the SPA for a few hours at a time when you want to use it.

I have a 10k gallon in ground pool with a raised adjacent spa with spillover. This is a foreclosed home I bought, so I have no information on how this was originally set up. There is an Aquatherm Heatpump thats attached to automated Jandy valves so it can switch between pool and spa mode. The...