Recent content by whitneystaley

ok I'll try it with the 6 gal bucket and adjust then we can see what happens. Just for reference can I add the A+ stain remover from in the swim to get rid of the present stain. I also will be headed out of town maybe as early as the first of the week, I'll be gone for six weeks. What would...

Tested again for copper and my wife says it looks about 0.5?? I really don't believe what the pool place says but I will go there tomorrow and see what number they come up with. The best I have found so far is a white pale 6 gals Regards

Went to town and so far I can't find any 10 gal white buckets, any other way we can test this? Regards W&C

I'm headed to the store just now but what I have is organic stain from algae during the start up. I presently don't think I have algae now just the stain. Regards

What can I use to suspend the cooper in the water and not cause it to add more stains to the vinyl. I guess they make some sort of liquid for doing this? Seeing that my cooper level is high should I drain some water down and refill? Regards W&C

Tex Just another quick question. I also need to get rid of the organic stain that's on the bottom of my pool. I was going to get the Jack's magic blue for vinyl liners or the A+ stain remover from in the swim. If I do this I'm not sure what they recommend my levels to be at before adding this...

I did another check on my pool this morning and this is what showed FC/CC- (1 x 0.5)? 1 heaping scoop of R-0870 to 10Ml water line Showed very light color pink and when I added 1 drop R-0871 the water turned clear, added 5 drops of R-0003 the water turned back to a very light color pink, added...

Texas, I did the CYA test according to the kit and I got nothing? it's where I have to watch the little black dot in the bottom of the small tube until it disappears, which it never did? FC was 1 x 0.5, the TC was the same reading. Should I try doing these again?

Cowboy, Do these readings seem correct? Sorry for the late reply but I had a sickness in the family so I had to take care of this. Back to the test FC- 1 X 0.5? TC - 1X 0.5? PH- 7.9 TA- 200 CH- 380 Thanks W&C

Sorry for the late reply but I had a sickness in the family so I had to take care of this. Back to the test FC - 1 X 0.5= ?? TC - 1X 0.5= ?? PH - 7.9 TA- 200 CH - 380 CYA - Tested as per K-2006 but did not get any reading Thanks W&C

Sorry for the late reply but I had a sickness in the family so I had to take care of this. Back to the test FC- 1 X 0.5? TC - 1X 0.5? PH- 7.9 TA- 200 CH- 380 Thanks W&C

TA - Total Alkalinity it took 17 drops to turn from green to red x 10 = 160 if you don't count the last drop. So I think this is telling me that the TA is to high? I'm going to retest my FC/CC to be sure it get the same reading and then I'll be checking my PH, CH and CYA. Regards

1 drop = 0.2 PPM use line 25 mL, for 1 drop = 0.5 PPM use line 10 mL so which should I use?

OK, I have done this and there is no color, it's still clear so that's telling me we have no chlorine at all? Now I'm being told that my perma salt system uses copper & silver ions to produce a Non chlorine., which to me sounds unsafe to be swimming in. Here is what there web site says and I...

According to Taylors kit FC/CC test to be checked first, I know this sounds crazy but I'm not sure which line to fill it to. If I go by the taylor kit? it says for 1 drop = 0.2 PPM use line 25 mL, for 1 drop = 0.5 PPM use line 10 mL so which should I use? It then says to use the R-0871...