Recent content by walfred

  1. W

    Air bubbles in the pump

    Thanks Richard for your quick response! Sorry I couldn't answer you right away, I was invaded by a bunch of friends!!. Well... apparently my filter doesn't have any air bleed and I looked around twice, the good thing is that the bubbles disappeared in 30 minutes leaving only one "stable" bubble...
  2. W

    Air bubbles in the pump

    Hi! this morning I attempted to vacuum my above ground pool and mistakenly I let some air to get inside of the system. I can see few bubbles in the motor and small streams of bubbles coming out from the return every 2 seconds more or lees. What should I do? Thanks, Walfred.
  3. W

    Trichlor for shoking?

    Definitely the pool store will suck the money from your wallet with crapy stuff, they sold me the strips that Richard mentioned!. Well, I guess that I have to get the FAS-DPD test as soon as I can before I ruin my pool's water! Thanks guys for the advice! Walfred.
  4. W

    Trichlor for shoking?

    Hi, two weeks ago when I start using my first owned pool (12' above ground pool), my neighbour made me shock (that was his theory) the pool with two trichlor pucks, that was right or there is another way to do it?. I read the "HOW TO SHOCK YOUR POOL" section, but it doesn't explain which product...
  5. W

    Where to place skimmer valve for a proper backwash

    Wonderful, thanks a lot to you both guys !!!!!!
  6. W

    Where to place skimmer valve for a proper backwash

    Perfect!, that valve is set in 50/50 in a daily basis so I will follow your instructions from now on. Just to understand the hardware, could you please tell me when I should use the other 2 option?
  7. W

    Where to place skimmer valve for a proper backwash

    I guess is that one, it is located right underneath of the skimmer basket. I have an above ground pool.
  8. W

    Where to place skimmer valve for a proper backwash

    Hi ! This is going to be my third backwash but I'm a little confused on where to place the skimmer valve. Mine has 3 different positions: 50/50 Full drain Full skim The valve is usually in 50/50 and when I did the two previous backwashes my neighbor told me to place it in Full drain then back...
  9. W

    Where and how to add for example dry acid

    Amazing, if people like you are available to give us the proper answer all the time I will get the hang of this very quickly! Thanks a lot Richard, for sure more questions will pop up so I will be over here sooner than later! Walfred.
  10. W

    Where and how to add for example dry acid

    Thanks Richard!, and last question for today, could you please guide me to a link where I can see a chart or something showing when in the day we have to add other chemicals?, I'm asking this because few minutes ago I read in another website that we should be adding acid early in the morning and...
  11. W

    Where and how to add for example dry acid

    Hi Jason! I really appreciated!, definitely there are many things that I need to learn. One last thing about this topic, accordingly to the Recommended pool Chemical section, we have to leave the pump running at least 30 minutes, that could be interpreted like we should add the chemicals before...
  12. W

    Where and how to add for example dry acid

    Hi there, I'm a newbie on this pool staff. I recently bought a house with a 12' rounded pool x 4' high, I found this topic about how to lower de TA, PH, quite simple steps to follow, but is not clear for me where and how to add for example dry acid, which is the one that I bought (is kind of...