Recent content by Tom Tank

  1. Tom Tank

    Total Alkalinity Jumping?

    I ordered full replacement at the end of March for my TF-100.
  2. Tom Tank

    Total Alkalinity Jumping?

    I tested my TA last weekend and noticed that it was at 60. My pH was at 7.5. I thought that I should raise my TA to 70 or 75 so I added the proper amount of baking soda. I added it in 2 days and the amount according to the Pool Math. The last few days, I tested the TA just to see where it...
  3. Tom Tank

    Bonding Question

    Pool is about 15 years old. Why do you think they would bond everything and not run the wire in a loop back to the pump? When I shut off the booster pump there is no tingling sensation at all. However, the booster pump is bonded.
  4. Tom Tank

    Bonding Question

    Never had an issue before and now start to feel a little tingling on my hand when my Polaris Booster Pump is on and my hand is on the pavers around the pool. Nothing has changed except that I moved some pool furniture around. Does aluminum pool furniture need to be bonded somehow? Also, where...
  5. Tom Tank

    Couple of closing questions

    Thanks for the response and videos. I watched them and now have one more question - I thought the chemicals to raise the FC and Poly60 should be put in advance of the pool closing. It looks like the video shows it on the same day. Also, I was thinking that my gas leaf blower could do the...
  6. Tom Tank

    Couple of closing questions

    First time pool owner and I will be closing my pool myself for the first time this season. I have been following the TFP method for half of the season and it has worked great. My current setup is 3 returns, 2 skimmers, main drain and waterfall. Can someone validate my closing plan and answer...
  7. Tom Tank

    Algae returns at FC level of 7

    I just went through the same thing with algae returning after a successful SLAM. After the algae returned, I SLAMMED again, but this time used Polyquat 60 after the FC levels went down. My pool has been clear even with heavy bather loads and FC creeping close to the minimum for my CYA level...
  8. Tom Tank

    When to use Polyquat after Slam

    @ Sunny Good thought on checking the waterfall. We typically don't run it very often because it raises the ph too high. I will double check it now. @duraleigh: not losing faith in TFPC method and just chlorine. I wanted extra insurance for the algae and thought polyquat would work. The...
  9. Tom Tank

    What value do YOU keep your FC level at?

    Do you typically add bleach at night after the sun goes down or in the morning? I have been testing in the morning and adding bleach before the sun goes up. However, I am thinking maybe test at night and add at night for the next days consumption. Is that the best approach?
  10. Tom Tank

    Algae Back?

    Thanks for the advice. I have done what I thought was a good job of brushing the pool - removed light, removed ladder etc... The water is clear now after the second SLAM was completed, I am letting the FC drift to maintenance level. I have added polyquat 60 today and will continue to monitor...
  11. Tom Tank

    When to use Polyquat after Slam

    I have not tried adding borates, but thinking of doing that at the start of next season. I have avoided phosphate removers because of reading through these forums, but will probably use it if algae returns. Right now, pool is clear, FC is dropping after the SLAM. I am going to add polyquat 60...
  12. Tom Tank

    When to use Polyquat after Slam

    Thank you. This is my first year ever owning a pool, so I apologize for the questions. If the "algae" I am seeing is indeed pollen, would it make the water turn green too? When I brushed the pool the day I found the algae, it brushed off rather easily and created a cloud after the brush...
  13. Tom Tank

    When to use Polyquat after Slam

    Thanks tim5055. We missed some really good swimming days the past two weeks. I have followed everything that I could on this site, but still fear that algae will come back. Here are my latest readings: FC=27 / CYA = 70. FC is too high to get a good reading on the ph, but before the SLAM...
  14. Tom Tank

    When to use Polyquat after Slam

    Thanks, but this is my second time doing a SLAM in two weeks. The first time, it passed all of the tests and I maintained the FC to the appropriate FC/CYA level. However, algae still came back. I don't want to keep dumping a ton of chlorine in the pool (my CYA =70) and read that polyquat is a...
  15. Tom Tank

    When to use Polyquat after Slam

    Finished my SLAM and now have a question about Polyquat. My FC levels are really high due SLAM, can I put in Polyquat 60 now or should I wait until FC levels drop? I am going to use polyquat as insurance but read on some of the forums that it can break down faster when FC is high. Can someone...