Recent content by tcrb

I assume the way to correct that is to install an update? I read through the info that JamesW posted above and I'm not inclined to spend the $750 for the Pentair programmer and I dont think I have the patience or skillset to build my own. I will check around to see if there's a pool company in...

So after your last response, I went to the panel and the pump display now says Display Not Active (no idea why it changed). I selected VS as the pump type, assigned the circuit as "Pool". Then hit the filter button and it started right up. Seems to be running fine now, but will set start/stop...

Only VS and VF are available at the panel. The VSF option is only available at the remote.

1. Check - Both ends connected 2. Both set at Pump #1 3. The available types at the main control are only VS and VF. However, on my hardwired remote inside the house, VF, VS, and VSF are available. I can assign it as VSF from the remote, but when I assign a circuit (Pool), I get "Communication...

Sorry for the delayed response... travelling + holiday events delayed the install. I went with your recommendation of Intelliflo VSF ). Finally had time to install it a couple days ago (and replaced that breaker as well). For power, I used the wiring from the single-speed pump that was...

What unions and nipples should I order? I hate to ask such a basic question but want to be sure I order the right items. Looks like my current pump has schedule 80 nipples. Is that standard for all pump installations? I think everything else in my system is sched 40.

Is there a specific model number you'd recommend? I see 5 different models listed:

Thanks for all of your feedback. As I mentioned above, I think I'll just bite the bullet$ and get a new Intelliflo.

Thanks for the recommendation. All things considered, I think a new Intelliflo is the way I'll go. And I'll swap out that breaker as well.

I'm not an electronics guy, and if I decide to go the route you are suggesting, I will definitely hire a local pool company to do the installation. Can you tell from this picture if there are enough unused relays? It looks to me like there are at least two.

I see. I will check for available relays.

I misunderstood. I thought you meant a motor recommendation for my Whisperflow. I dont think I want to buy a whole new pump.

I'm all ears...