Recent content by Syncmaster

The controller just control the main pump and the oxidizer. The controller have 10 dip switch that controlled how many hours you want to run the pump in high speed. It also have 2 separate 3 position switch that controlled the pump on/off/auto in high speed and low speed. How do people usually...

The controller is a "Jandy 5295F". This board has a set of 10 dip switched on the back and 2 separate 3 position switches on the front. I google this board but couldn't find any useful info. Thanks for your help.

The 2 speed main pump is a A.O. Smith B977, 1-1/2~.20 HP, 3450/1725 RPM, 230V The booster pump is a Polaris PB4, 3/4HP, 3450RPM, 230/115V The booster pump is not connect at this stage, the above diagram show the booster pump wired to the same location as the "SmartPure Oxidizer", the oxidizer...

Hey Guys, I'm in the process of installing a booster pump. I need yall help to show me where to wired the timer to control the On/Off function. Below is my current wiring diagram, where should I connect the "load contacts" wires from the time clock? Also, did I wired the booster pump "hot"...

THANK YOU ALL!! This forum rock!!!

Thanks for quick response! The pipe is 2 inch. Why get rid of the chlorine feeder?

Hey Guys, I'm planning to install the booster pump this weekend. I need yall help on how to proceed with the plumbing. 1. Do I need to redo the piping OR I can cut maybe few inches off and insert the 2 inch T fitting? 2. Is this the correct stuffs to glue the PVC piping for swimming pool...