Recent content by sjfrank

  1. S

    Gap Between Tile and Coping?

    :) I just realized I answered my question. The deck is not suppose to slope, I never really thought about it. How did go about lifting it?
  2. S

    Gap Between Tile and Coping?

    Thanks, it is hard form me to tell if its sunk in the back, deck is on a slope down from this photo. B
  3. S

    Gap Between Tile and Coping?

    New to owning pools, bought house that had one that was severly neglected for years. There is a gap running between the pool tiles and the cement coping. It runs about 1/2 the length of the pool and 1/2 inch at its thickest. Not sure if this is something I can fix with the pool open and full? 2...
  4. PXL_20230802_190737439.jpg

    PXL_20230802_190737439.jpg

  5. S

    SLAM?

    This was a post in reply to another post- It was moved here so there is a lot of context missing. I will close.
  6. S

    SLAM?

    So right now the pools doing pretty good, would you recommend SLAM at this point in the summer or wait until next spring. I didnt realize you could use the pool during the process but that actually makes sense. I planned on doing SLAM next spring. I did "shock" by adding a container of liquid...
  7. S

    Intermatic Timer Help

    (see photo) The timer on my pool isnt working, I just moved in this year and havent needed the timer, but just noticed the gears are not turning on it. I look at some images, videos on wiring and then looked at mine(didn't remove the cover) But the wires I can see don't match up with what I...
  8. PXL_20230717_133401681.jpg

    PXL_20230717_133401681.jpg

  9. PXL_20230717_133337330.jpg

    PXL_20230717_133337330.jpg

  10. S

    A pool that hates chlorine

    Im new as well and had a similar issue this year, I didn't drain the entire pool, I drained a few inches a day until I noticed the numbers stabilize after adding chlorine. I use both, strip and the Taylor kit. The strips for me are fine in knowing when its probably safe to get back in the pool...
  11. S

    Underwater Lighting Question

    Yeah after I wrote it down I kind of realized I wasnt dealing with a power issue. Thanks I will replace it.
  12. S

    Underwater Lighting Question

    My pool has two lights, spa and pool side. The pool side light comes on about 20% of the time when I flick the switch. When It does come on I notice the spa light blinks quickly. What might cause this behavior? I really cant understand why the light comes on sometimes and not always when...
  13. S

    Glass filter media in pool

    Its a Hayward , 3450RPM I had been backwashing but yesterday I vacuumed with probably a week in-between. I will try giving a longer backwash and rinse and see if the dirt comes back into pool. Not sure if it was immediate, I was vacumming for some time and noticed the spa area was getting very...
  14. S

    Glass filter media in pool

    I've been dealing with glass in the pool. I haven't taken the filter apart yet to inspect the laterals. I do have a question. The previous owner of this filter/house put glass media in a sand filter Hayward s210t. When looking at the glass in the pool it is very fine and i'm wondering if that...
  15. S

    First Pool - New House- Glass media in Pool Many Questions

    I bought a house with an inground pool, it has a Hayward s210t multivalve. I had a local man open my pool, he was the same person the previous owner had open and close it. I am also 100% sure the previous owner did nothing to maintain the pool for a year outside of open and close it. He only...