Recent content by roland7398

  1. R

    Filter damage from Bacquacil pool with too much algae

    psi sorry i'm senile sometimes. stays at 20 will drop down below 10 ONLY if i vaccumm on waste, then backwash
  2. R

    Filter damage from Bacquacil pool with too much algae

    The filter was dragging before I started the conversion, now it is working much better. My pump is a hayward 1hp. My question was more about the bpi if that is considered normal for a brand new filter.
  3. R

    Filter damage from Bacquacil pool with too much algae

    Hi. We got a brand new Hayward 1HP pump and filter last July. This year when we opened the pool it was a little green but clear to see to bottom. Pool is 21k gallons 16 X 32 rectangular inground with 3 ft and 8 ft ends. After 8 days of endless work and endless BAC products we gave up and started...
  4. R

    Measuring CCs at end of conversion

    How do I measure CCs at the end of a conversion from BAC to Chlorine using the Bleach method? I know CCs are chlorine combined with something but I'm not sure how I measure it so I get to .5 CCs. Thanks!
  5. R

    Question on Conversion of BAC to Chlorine use Bleach method

    Re: Question on Conversion of BAC to Chlorine use Bleach met Hi John T thank you my question is during the conversion steps it says your conversion is complete when CC's are .5 or less two days in a row. I don't know what that means. What exactly are CC's and how do I measure them? THank you
  6. R

    Question on Conversion of BAC to Chlorine use Bleach method

    Hello all. Having been reading posts for days and am into day two of bacquacil to chlorine conversion using the bleach method. So far have used 25 bottles of 96 oz bleach, 6%, brand X. Pool is inground, 21,000 gallons, 16 X 32 with a 3 foot and 8 foot end. I have gone from deep dark green to pea...
See more
Top Bottom
Back