Recent content by pyrotiger

I highly recommend Outback Pools to address your issues if you are not able to resolve the issue on your own. Pm for contact info Sent from my SM-G925P using Tapatalk

You might have an obstruction/ crack in those two jets producing little flow. To resolve a clogged line, you can get a drain king which attaches to a water hose and you put it directly into the jet it will then decompress itself to secure itself to the pipe and then creates water pressure until...

Cc (trichloramines) elimination requires daily supershocking(twice as much as you would put in normally to raise FC from a zero ppm to 3 ppm) and running the system continuously until the cc disappears. It usually takes 3-4 days for a standard 15-20k pool to eliminate the trichloramines using...

Yes that's why I mention superflo vs along with the intelliflo vs for plumbing considerations Sent from my SM-G925P using Tapatalk

Add a phosphate remover. Orenda phosphate remover work wonders.j jacks magic pool perfect/phosfree does just as well if not better as it also helps your filter efficiently. They're both natural based Sent from my SM-G925P using Tapatalk

The prices are fairly similar across the board, and is based largely on what festures are built in. The unique differences are in the features each pump provides. The comparison charts are fairly self explanatory in what each pump provides. A TriStar VS pump would be the ideal choice to suit...

The acid process is to remove calcium buildups, as this would be a brand new cell. There should be no need to do the acid wash process. You should be able to just rinse the cell completely then look at the sensor rods, situated between the flow switch and the anode rods and ensure there is no...

You may need to reset the cell by unplugging it then waiting a moment before plugging it back in. Also sometimes the filter might be having issues and passing debris through and that gets stuck in the salt cell. So you might want to check that while you wait for the power cycle to complete...

You could find comparisons between these pumps. Here is a link to one, Variable Speed Pool Pump Buying Guide Sent from my SM-G925P using Tapatalk

Did you set the filter pressure on the VF pump after cleaning it? Sent from my SM-G925P using Tapatalk

No problem! I'm sure your PB will be thrilled to install a smart pump for you Sent from my SM-G925P using Tapatalk

Having a swg has no impact, and that pump will have the option to adjust speeds from low to high, low to maintain circulation while keeping energy costs down, high for a few hours to help with turnover rate and catch debris. As far as the original pump picture shows, you will have room for the...

Yes per your automation, an Intellicomm is needed to adapt the intelliflo pump to your Jandy automation. In this case, relay switches are used in conjunction with the com wire in order to operate the pump at 4 available preset speeds. It is a workaround to make both brands compatible. I would...

I stand corrected. Though do keep it dry :-) Sent from my SM-G925P using Tapatalk

The only way pentair will "provide" a new drive unit replacement is via warranty. There's really no user serviceable parts inside the drive unit as it is supposed to be hermetically sealed from factory to end of life. You could though find replacements via resellers, the model numbers would need...