Recent content by powell

JamesW, you were right on. Thank you so much. It was wired 120 so I switched the jumpers and now all is good. I plan on putting a new current limiter on the old board to keep as a spare.

I ordered some voltage limiters from digikey and plan to put a new one on the old board. Will let you know. - - - Updated - - - Diagnostics are 2800 62 14.7 0.00 24P -0 AL-0 r 1.59 T-15

Aqua rite t-15 swg stopped making chlorine. All lights were off. Unit is 8 years old. When starting up, no flow light flashes for 45 sec, the generating sanitizer turns on for 10 sec, then all off. Before I read about the known issue with the current limiting varistor, I ordered a new pcb. I...

This is exactly what my swg is doing. Before reading these threads, I thought the pcb was bad. I just put in a new circuit board and the display does the same thing. Flashing no flow -45sec, then Gen sanitizer about 10sec, then off. Any thoughts?

I've been having problems with new water loss in my pool and suspect a leak somewhere. I have an in ground vinyl liner pool at a weekend vacation home with a Coverstar pool cover. Pump is on a timer running 12 hrs/day. Have a cartridge filter. Pool is 4 years old. Normally water level when I...