Recent content by pooley1

Yep, yesterday. Removed from pool, dismantled, cleaned, sanitized and replaced.

Water is crystal clear. Just added more bleach, FC dropped to 13 from 20 in 3 hours.

So I've been maintaining FC of 20 for 3 days. Water is and has always been clear. CC goes back and forth from 0.0 to 0.5. OCLT has been 4-5 loss each night. We've removed, cleaned and sanitized the ladder, brushed pool etc. I thought we would have seen improvements as far as not losing so much...

Thanks, pool is clear, CC is 0, have not done the overnight test yet. We haven't had issues before and are consistent on maintenance. Just noticed the increase in consumption. How harmful is swimming in a pool in this condition w/ possible algae?

FC 7 CC 0 PH 7.5 CYA 45 Had 0.5 CC so brought up to SLAM 2 days in a row, went from 28 to 7 in 24 hours both days. Outside temp high 91. What should I be looking at? I use 10% liquid bleach. Thanks

10.4 thanks for the responses

Adjusted CYA to 50 when we opened pool in May, now is at 30. The past month or so, the chlorine demand has increased, I attributed this to warmer weather and full sun, we've had a stretch of high 90's. We have had some heavy rains, but other than backwashing once in awhile, I haven't removed any...

No, same diameter, same height

New pool has more movement when kids are jumping in and splashing. Previous pool didn't move. Movement is in wall and top resin rail. Anyone else have this?

Pool water looks clear, PH 7.4, CYA 55, FC about 5, CC 0. I can see the yellow at the bottom of the Liquidator. How much bleach should it take for a 13,500 gallon pool with a FC loss of about 2 per day? Maybe it takes more bleach than I realize.

I have the Liquidator installed and working, but doesn't seem to be keeping up with chlorine demand. Pool is in full sun, I have it set to run 8 hours per night, the flow meter shows 4. 24' diameter pool 4' deep. CYA is about 55. I'm trying to keep it at 6-7 FC. I wouldn't think I would lose...

I just installed the Liquidator chlorine injection system. I can't get any flow when on the low setting, some flow on high. If I restrict skimmer flow, the LQ flow can max out when the pump is on high. If I install the supply tube directly into the pump drain plug will this help. I've read about...