Recent content by pokey

  1. P

    West Edge Primera Stone Color - Anyone ever used Lazurite? What colors do people like?

    I should mention it's going to be a SWG pool. For some reason the builders in North Dallas discourage saltwater but from what everyone on here says it seems like the way to go.
  2. P

    West Edge Primera Stone Color - Anyone ever used Lazurite? What colors do people like?

    We've decided to use Wet Edge Primera Stone for our pool renovation. I like the look of the Lazurite online but I'm worried it looks too artificial: Wet Edge | Products | Lazurite Also, there is literally zero evidence of this product existing anywhere online other than the Wet Edge...
  3. P

    Skirting the 3:1 slope requirement

    We are remodeling our 1960's era pool. Right now there's a shallow end that starts at 3.5', goes to 4' and then slopes down to 8.5'. The shallow end is a little crowded - we and all our friends have 4-7 year olds - and so we originally intended on extending the shallow end and bring up the deep...
  4. P

    Adding a tanning ledge in the deep end: is this a thing?

    What is a cocktail cove??? That sounds like something we would definitely be interested in!! Please tell me more. I hear you all on not wanting to lose the deep end. The trouble is that the pool is shaped vaguely kidneyish with the three stairs down in a little offshoot area and then a...
  5. pool2.jpg

    pool2.jpg

  6. pool1.jpg

    pool1.jpg

  7. P

    Adding a tanning ledge in the deep end: is this a thing?

    We bought a new house in May of last year and moved from a sport pool we loved - rectangular and four feet deep on the sides and five feet deep in the middle - to a giant kidneyish shaped 70’s diving pool with a very small shallow end and a huge drop off to a large 8 foot deep end. We’re...
  8. P

    Spa draining - so is the wallet.

    I am in Dallas as well and *also* have a mysterious undiagnosable leak that I have spent thousands of dollars trying to nail down. I actually had my entire pool replastered which I think helped, but I still have tons of bubbles in my return and my pump never maintains full pressure - it fills up...
  9. P

    Pier Pressure: How to Stabilize A Heavily Cracked East Dallas Pool

    Ok, but isn't it true that you can't put a liner over stairs? And I'd have to replace all the skimmers, inlets, drains, etc.? Am I working off old tapes? If vinyl liners solve the cracking problem (and apparently resist algae better) why isn't everyone on the vinyl pool bandwagon?
  10. P

    Pier Pressure: How to Stabilize A Heavily Cracked East Dallas Pool

    I hadn't thought of that. Seems like putting a vinyl liner in a concrete pool has plusses and minuses but it definitely is something I should look into. What about putting in a fiberglass liner? That seems like it might be a better solution?
  11. P

    Pier Pressure: How to Stabilize A Heavily Cracked East Dallas Pool

    Hello- I bought our house, complete with a gunite pool, five years ago and I have always had problems with the pool which I knew were caused by leaks somewhere in the system. In the last year, though, when the weather was warm (which was a lot of the time) the autofill ran constantly and our...
  12. P

    Green Swamp with Dreams of Sparkling Oasis - help!

    I should add that I poured the chlorine in at 9:15 pm.
  13. P

    Green Swamp with Dreams of Sparkling Oasis - help!

    OK, so I'm losing about an inch of water a day in sunny Dallas, Texas. This may be a leak and it may be evaporation. I do have bubbles in one of my returns and in the pump basket so I'm thinking there's a crack in a skimmer throat. Regardless, I let my pool go to seed while I fooled around...
  14. P

    I'm having some problems...

    ...which may or may not be related. They are as follows: 1. My pool appears to be losing about two inches of water a day. Admittedly, its gets 15 hours of 110 degree sun in Dallas, Texas so perhaps it's due to evaporation, but it seems like a lot. It never used to lose this much in the...
  15. P

    What happened to my CYA?

    I have a similar problem - My CYA was at 50 and then I didn't test CYA for a few months and now I clearly am at zero. So I put 4 pounds in a tube sock and put it in the skimmer and will leave the system running 24 hours as directed. But how long do I leave the sock in? Do I take it out after 24...