Recent content by npkr01

Problem appears to be solved. My PB added 12 inches of straight pvc in front of (leading into) the IC60 2 days ago and I have had a continuous green flow light on low pump speed since then. Keeping my fingers crossed but it appears that turbulent flow was the problem. Thanks to all for their...

According to Pentair's literature, both the IC40 and IC 60 require the same flow rate, 25 gal/min, to activate the chlorinator. It still doesn't make sense to me that the IC60 will make chlorine on low pump speed with a green flow light for up to 49 minutes (always more than 8 minutes) before...

To his credit, my PB finally changed out my IC40, which based on prior post a couple of weeks ago, was probably undersized or malfunctioning (I could never get any chlorine reading at all unless I left it on 100% for several days in a row). At my request (and based on some feedback from this...

Re: Zero chlorine in pool with Intellichlor IC-40, algae gro Just a quick response to your questions- I will put info in signature line later today. Plenty of salt was added by pool service guy(20 forty pound bags) and I added three more to bring salt level to 3200-3450 (proper range). It has...

I had my Ig pool completed 4 weeks ago. We started using it 7/29. I have never had any readable free chlorine in the pool by dipstick or color change test with the unit set at 50% on low speed or high speed, running it at least 12 hours/day, 7am to 7pm. I am using the TF-100 kit. My pool is...