Recent content by Nic3456

Sorry for the delay - the hose is the original Polaris hose and is ~4 yrs old

Tested the RPMs - came back at 29 - back to the drawing board....

Thanks for the info - I glanced at Amazon - would I need a new relief valve & wall fitting or just relief valve? I feel like its getter harder and harder to remove at the wall so I may just buy all new parts

Thanks I'll give that a try - I have the corrugated white hose - didn't realize there were other options, might have to look into that clear one - is it any better/cheaper?

I've been a pool owner for almost 3 years. First year I don't recall having any issues with the hose of the 360. The past 2 years I seem to have at least one section of hose spring a leak every 2-3 months and its costing me a fortunate. Any tips/ideas on what the issue might be? I thought...

So I've been a pool owner for 2 years, but something just dawned on me. My house is on septic and when I backwash my pool the outlet is literally about 4 foot away from the pump/filter and just discharges into the grass. I've never really liked this, but doesn't seem to cause any major issues...

So my first winter with a pool and its freezing here in Dallas! I did not close the pool but have a freeze guard. However, everything I read talks about how those are good for nights where you're going to have 8-10 hrs below freeze. Its currently 26 and supposed to get as low as 15 and not...

So I have a Polaris 360 with a Jandy Filter Bowl (One of the clear bowls with a small filter in it.) It is constantly leaking (I have tried various tightness, various amounts of lube and replaced the O ring all to no avail.) Pool guy says its $180 to replace (I'm assuming/hoping that's with...

Thanks! I am not at home to verify but judging by the pictures online I would to say a 360 ( I have only lived in the house for 6 months but would guess the cleaner is at least 5+ years old.

My polaris has only been running about 21 rpm so I have been trying to boost it. Anyway when I shut the value to run through the filter it gets me up to 30-32. Is this bad on the motor/components? Everything I have been searching talks about not running the booster pump without the main pump -...

It's a de filter and pressure was running around 15-18 (but it was a bit dirty) - 12 was normal but this is my new house and I have only been tracking a couple of weeks. Anyway after they were done pressure has been running around 8 I wen ahead and back washed and it stayed at 8

Had a 12 year old 1.5 hp Hayward pump ( same motor for filter and polaris) motor gave out and warranty company replaced motor only (with century centurion) since then it seems like my polaris is moving about half the speed and not sucking stuff up as well. It usually has the pool sparking by...