Recent content by msummers

Thanks, just did -- Myrtle Beach

Any thoughts on what I could do to repair this. I have a few places where the coping is starting to break off. Our pool was installed in 2020 and is fiberglass. I realize that he probably should have had the plumb strip put in. I am also worried about that corner where the control joints are...

Thanks -- yeah I'll check Lowes for a new one -- Just never thought that it would "cook" like that.

I was just uncovering my equipment (which I take in my 2 spaflex hoses, pump and my filter-to-pump-hose-re-inforced-vinyl for the winter) and I found this (see pic) on my backwash hose(same type as my filter-to-pump) which I leave out. The filter and hose was covered with a blue tarp. This is...

Thanks so much!

My Hayward pump is leaking at the shaft stem. I am guessing it is the seals. When I replace them on Hayward's site they say : Clean and lubricate the impeller hub shaft and pump housing seal recess with a dilute solution of non-granulated liquid-type soap. The use of petroleum or silicone...

Anyone -- on my last question? I had another thought that maybe I could leave everything connected if I had a drain plug on the pvc pipe on both the skimmer and return sides so instead of a 90 at the bottom I would put a T and then use a 1.5" plug with an O-ring and just remove it when...

I found it and the part -- Brisbane by Atlantic 21' -- thanks again

No. It just happened tonight. I was just trying to locate it online. I will tomorrow. I just dont know how much help they will be

Any idea where I could find a replacement top connector -- the one side is ripped. Or maybe how to repair -- but I doubt that is possible. I took it off but can't find any product id at all thanks

Thanks - I was concerned that it might impede the flow and cause debris not to be "skimmed"