Recent content by mnb

  1. M

    Replacing jandy lxi temperature sensor?

    Thank you. I'll pay attention to that when I replace it. "Life moves pretty fast. If you don't stop and look around once in a while, you could miss it."
  2. M

    Replacing jandy lxi temperature sensor?

    Anybody? Bueller?
  3. M

    Replacing jandy lxi temperature sensor?

    Any tricks that I need to be aware of? Looks like all I need to do is unscrew the retaining bolt and replace. Is it that simple? I'm assuming that the sensor is bad. Heater setting always is at least 5 degrees higher than the actual temp in the pool. I don't remember it being that way last...
  4. M

    Fiberglass Pool install...

    Thanks. Concrete is 22 inches on stair side and 26 on the other. 38 inches on skimmer end and about 50 on the auto cover end.
  5. M

    closing pool with automatic cover in Indiana

    We do use our autocover as our winter cover and it seems to be holding up just fine. My pool builder closed my pool the first year and basically walked me through it so that I could do it myself in future years. I have done it myself the last three years. I leave the water level at its...
  6. M

    Cooling the pool- water to warm!

    I bought one of these. It's the same principal as the fountain above. It does work fairly well. http://mistcooling.com/poolcooler.htm
  7. M

    Removing rotten meat odor from travel trailer freezer/fridge

    Re: Removing rotten meat odor from travel trailer freezer/fr Crumpled up newspaper. http://lifehacker.com/5828958/remove-ba ... -newspaper
  8. M

    copper and green hair

    My pool also tests as having no copper but my blonde daughter gets a green tint over time because of swimming. I've convinced myself that even though the test show no copper, there must just be a small enough amount in there to turn her green over time. We use the children's swimmers shampoo...
  9. M

    Fiberglass owners... does your pool have any gelcoat cracks?

    Re: Fiberglass owners... does your pool have any gelcoat cra We put ours in in the fall of 2008. No cracks that I know of. fiberglass-pool-install-t13849.html
  10. M

    Automatic Pool Cover Reliability

    This is my 4th season with my autocover and I have not had any problems. (knock on wood).
  11. M

    looking for outdoor TV's

    How do,you like this tv? I have been looking at those for quite some time now, but have not pulled the trigger. How is the brightness and overall quality?
  12. M

    pool heaters

    I have to disagree here. I live in IL and the heater makes the pool so much more usable to us. We don't heat it all the time, but when we choose to swim (even on a cool weekend) all we have to do is turn on the heat and I can get it to whatever temp we want. If you are going to get a heater...
  13. M

    Autocover question

    I have a coverstar auto pool cover and don't have any air jets. I didn't even know that was possible. Mine just rubs on the deck as it closes and opens. Still going strong after 3 years.
  14. M

    Great article on problems with chlorine and SWGs as solution

    Re: Great article on problems with chlorine and SWGs as solu Here is the full article from Google cache. Really does make it seem like salt water pools are not chlorine pools. http://webcache.googleusercontent.com/s ... 39750.html
  15. M

    Is high TA a problem?

    FC 4 CC 0 TA 160 PH 7.6 CA 250 or so. CYA 70 Salt 2900 Just noticed that my TA has crept up from 120 to 160. I have been running the slide a lot and I have a new pool mister fountain to try and help cool my water that I have been running for a few hours a day. Strange thing is, is that my PH...