Recent content by maxdorii

Thanks so much for the manual, when I looked at the frontboard and the backboard in the manual, they were not the same as my installed boards. The frontboard did not have the 3 test buttons. The closest thing I have is a reset button above the AUTO/SERVICE/TIMEOUT lights, which I have tried...

Thanks for the reply. The salinity level is actually at 3200ppm. When initially turning the unit on, the display shows de, then shows salinity at 0, then shows salinity at 90%. Does this sound like a bad mother board? I've used the reset button numerous times with no luck.

Not wired to the pump relay. Water test revealed salinity level near zero.Pressing the C button or any button does not change the display at all. It is frozen at chlorine level at 90% and a "wait" msg in the lower right. I just cleaned the cel the day prior to my initial post. The display does...

Help! I have a 4 year old Jandy Aquapure 1400 system and a few days ago it stopped generating chlorine. I cleaned the unit per the instruction manual but I believe the problem lies with the motherboard. When I turn the system on, I get a beep, followed by a power light and a reverse sensing...