Recent content by Littlemonkey

Re: Cloud/tiny bubbles coming from Aqua Trol SWG My issue with the tiny bubbles has subsided quite a bit since I first posted last week. I would agree that it has to do with the chemistry. I ended up leaving if off until my chemical assault (that's what it felt like) was complete and the pool...

A friend of mine had a similar problem. So he cut the wire about 4 inches from the SWG and tied the two wires together. Shorting it, essentially. He could have just sacrificed an old telephone cable... The message disappeared. He figured it was the switch. Well, yes and no. It turns out he had...

Pool looked better this morning. I could see the bottom of the shallow end. Not covering the pool this year was a mistake. Decomposing oak leaves really mucks things up. Measurements this morning: FCA = 3 TCI = 3-5 Alk = 80-120 pH = 6.8-7.2 TH = 250-450 CyA 0-30 Salt 3000 Temp 78F Added 300g...

I tested the pool tonight with an HTH test strip: FCA = 10 TCI = 10 Alk = 120 pH = 7.8 TH = 450-800 CyA = 30-50 Salt = 3000 (per SWG) Temp = 80F Water still cloudy but not green cloudy. Shocked it a few nights ago. Added 400g of Pool Clarifier Granules (Aquarius) tonight to the skimmer. SWG is...

I'm sorta thinking along the same lines. The state of the pool is causing some sort of interference with the electrolysis process. I'll get back to you on the measurements in a bit. We have scattered thunder storms on the prairies after reaching 86F today. It's pouring rain right now. Thanks...

Hi guys, I had the no flow problem a few weeks ago with my Aqua Rite SWG and replaced the current limiter as per the "fix" that's circulating the internet. No more errors coming up on the board but I'm getting what appears to be a cloud coming out of the nozzles. I posted a youtube video to show...