Recent content by kapauldo

i would up ordering two of these, i spoke to the rep there, he said they were compatible with the jandy i am replacing and also have the face plate that the cover twists onto, i will report success of failure when i am done, thanks again for your help @Ahultin .

ok so does that conduit just flood with pool water or is there some seal in there i need to worry about? Also, we have one light in the pool and one in the spa, one day, the pool light wouldn't change color, then it stopped working altogether. A few months later, same thing happened to the spa...

thanks for your reply, i have not done that, but let's assume i were to do that, how do you physically disconnect the light from the wire harness? I ask b/c it looks like it's a hex coupling (the black wire has a black hex shaped male piece that feels like it has knurling on it that seems to...

We have the Jandy nicheless pool lights, I believe the part number is jluc10-100. I rotate the plastic cover, the light comes out about 3", I cannot figure out how to remove it. I don't want to pull too had b/c I don't know if there is a seal back there. Can anyone point me to directions on...

I'm happy to say my pool is crystal clear. I followed the advice here, I kept the chlorine level high and ran the filter 24 hours. I cannot believe how quickly chlorine drops in the sunlight. I guess you have to see it to believe it. Thanks for everyone's help here!

Sure it's not sand? I had a cracked vertical pipe in the sand filter (not sure what it's called but someone else will) that was causing a similar issue and I repaired it with stock PVC parts and it fixed the problem. If you're sure it's not sand then ignore but in case it's useful, this...

On the external back side of the pump, there may be a stub on the main drive shaft that you can move with a wrench. If so, move it around (disconnect power, etc. first) and if it moves, it may just be stuck. You can also open up the basket by the pump and fish around the impeller with a...

Thanks Kevin, is it really possible that algae is reproducing faster than it can be filtered? I just ran the filter for 24 hours and hyper chlorinated (I am truing to follow the SLAM thing but I don't have the precision test kits so I figured I'd approximate by raising chlorine super high and...

I have a 5 year old pool, it's a Jandy filter, and this year, I cannot seem to remove the haze from the water. A little more info - when I opened the pool, in April, a bunch of sand pumped into the pool, it turned out the bottom of the pipe that connects to the filter finger thingys broke and...

Hi, we got an inground pool last year with an attached spa. Earlier this year, I noticed that in the spa, the bubbles coming out of the valves completely blocked the person's legs. Yesterday, I noticed that you can now see legs and the water is not nearly as opaque from the bubbles. The...