Recent content by jwurtz

Pipe appears to be a 6-8 in . They said It was for water under the liner but based on the angle It appears it goes to behind the wall.

Sorry, here is a little more details in my signature. And yes this has all come from the tube.

I"m worried that my pool that was just installed last August/September is going to have some type of sink holes under my liner when we open it a month or two. What I'm showing you in this picture is the PVC pipe coming from below my liner and as you can see has a rather large mound of gravel...

Thanks for the help. I purchased the correct type of GFI outlet and that part passed the inspection. What didn't pass was the type of wires I was using and the fact that the pump and light were not on GFI circuits. Now I have purchased them and replaced what was needed I should be done and...

Thanks. Deck box passed inspection after passing the bonding wire through the little hole in the post in the back of the deck box. Thanks again.

On my list of fixit items from the inspector left me this one: GFI receptacles shall be AWR type and have a bubble cover installed. I've taken care of the bubble cover but I'm a little confused what he means by AWR type? The receptacle I have test out correctly when tripped. There is a...

I have one last thing left with my final pool inspection and it seems to be the thing that is causing me the biggest problem. The deck box. Before going into detail about that I'll give you a little back story. As mentioned in my signature I have a 16x32 inground pool, I have a 100 amp panel...