Recent content by jsbatch

OK. Thanks for the info. After much research I cannot find any source that sells the Paramount Water Valve parts. It appears that one must buy the complete Paramount Water Valve to cure automatic floor cleaning problems. Bummer!

I have a Paramount PCC2000 floor cleaning system installed in my Paddock IGP as originally built in 1997. I'm not the original homeowner but I am the second homeowner. So, the Paddock 'lifetime' warranty expired with the sale of the home to me. Boo! in the past six years I've had to replace the...

Thanks for the quick input! Yes, more wiring diagram study and thought tonight produced a wiring approach that (I think?) will feed 240V from each dedicated pump circuit breaker to each of the three switched circuits of one P1353ME timer. I can supply 120V line power to both timers (the P1353ME...

I plan to upgrade my existing pool 'automation' system by replacing two existing Intermatic T104 240V mechanical timers that now control ON/OFF events for two Pentair WhisperFlo WP-4 single-speed 240V pumps (filter & floor cleaner) with two new Intermatic P1353ME digital timers. My desire in...

Re: replacing two mech timers with a digital-- need wiring a I have the identical situation as you started with when you replaced the dual Intermatic T104 mechanical timers with the Intermatic P1353ME timer. Only difference in my situation is that I am using two P1353ME timers - one timer to...

Thanks for the tip! I found some interesting recommendations for pump volute crack repair on other pool care forums that suggest using high PSI strength epoxy putty to seal the crack - e.g. Rectorseal EP-200 - allow the epoxy putty to cure 24 hours, then liberally apply 3M Marine Adhesive...

I have an older Pentair WhisperFlo 1 HP WF-4 pump that operates a Paramount PCC2000 in-floor cleaning system. The pump volute (pump wet end body) has 3 inch long crack that runs through seal plate sealing face (under o-ring) causing significant water leak during pump run. Crack is slightly...