Recent content by johnt3

Thanks for all the help... The black disk (current limiter?) does not appear burned or cracked but for a few bucks it is worth giving it a try....

Voltage across both legs is 240V. Still cannot find a fuse... looking for either a glass tube type fuse or an automotive style yellow fuse.. No signs of burns or cracks on any of the components. What else do I need to check???

I rechecked visual of the board and noted nothing of significance. checked voltage between the 2 legs at 240V. Still cannot identify fuses unless they are hidden on the back side of the board. Don't know how to load a pix of the board. What is the next step in diy? Thanks, John

Thanks for the response. I have removed the cover and cannot locate a fuse.. When it stops raining (wonderful rain), I will check it again and take a picture of the board for you to look at. I'll also check the voltage between the 2 legs.

Like several others here I have a problem with my Aqua Rite electronic chlorine generator. It is not generating chlorine and the display is off. I have checked the power to the unit and it is 120V on each leg. The salt level is adequate. I have visually inspected the board and do not see any...

Thanks for the reply... I have visually checked the current limiter and the board and noticed nothing remarkable.

I share the concerns of the poster whose Aqua Rite Electronic Chlorine Generator is inoperable. I have 2 wires leading to the unit each with 120 V. The display is blank and the unit is Not generating chlorine. I cannot locate the fuse and do not know what other tests to run to determine the...