Recent content by jo66tr

Yes I take the filter out, it is dirty when I spray from the outside of the paper and look down in the hole in the center while spraying. I figured that it should be clean when I spray water through it.

Yeah I got it all clean I was just concerned that the water was coming through to the inside of the filter brown. I figured if it would go through while I was hosing it off that it would go through as it was hooked to the pool. Thought maybe my new filter was bad. Thanks

I just cleaned my Clearwater cartridge filter yesterday for the first time and had a question about cleaning. When I spray the hose into it and look down inside the water coming through is murky brown. Shouldn't it be crystal clear on the inside when I am spraying through it? It has only been on...

Thank you both, I am just trying to make sure I do everything right this winter.

First time with a pool and first time covering one. Is this cover to tight? Is it supposed to go straight down the side wall? Mine angles down probably 45 degrees from the sides and then angles down from the air pillows I have under it. I am worried about it pulling the sides in when it gets...

How hard is it to get the liner out of the track with the water in the pool? Should it just come right out? Also is it hard to line the skimmer holes back up? I was thinking of going to an aquador and needed to replace the skimmer face anyway, I think. I will be closing here in a couple weeks...

Did you remove the skimmer to patch it or just put the patch on with it on? Thanks for all of the replies.

Thank you for explaining the patching process. What would you use to patch it, anything in particular? I don't know what PB is but I asked both the dealer I bought from and the guy that installed and both said they would do nothing. Also if I patch it and reattach it the same way will it just...

The holes were already in the wall when I bought the pool kit. Here is the only other pic I have. It is raining now so I cannot take any right now. Do you think I can just repair it? Thanks

Yes if you have advice on patching please let me know. I am in northwest OH so it does freeze here. How could it have been done different in case I have to redo it myself? There is a bead track receiver or what ever you want to call it that is just above the skimmer I think that is what made it...