Recent content by Jkbr78781014

Is Pentair Home available for ScreenLogic customers? I downloaded pentair home and can’t figure out how to set it up. If not do I have to change my easy touch to an intelliconnect system?

I cleaned my grids with acid twice a few months apart. My cell is no longer producing. All my lights look normal. I tried a test pentair recommended where you install a dummy cell. Disconnect the ic-20 fill with pool water and press the flow switch. I should see bubbles in like 2 minutes. I did...

Help me understand why instant chlorine which is a liquid, at $6-7 a gallon vs regular household bleach that you can get from grocery store very inexpensive? is instant chlorine that much stronger to justify or does bleach have other cons to consider?

What is best to use for SLAM and why? calcium hypochlorite powder 73% or liquid chlorine 12.5% or 6% (bleach)

Same issue the bottle tips are different then Taylor tips and not interchangeable. I do all my own testing for years been getting 90-100 for Alkalinity for over 6 weeks. I tested with new TF-100 and reading 140-150 CH test with new TF-100 kit 450 I had tested by pool store Spinmaster CH 207...

Moved from HERE I just received my kit and very disappointed. The alkalinity kit is off by 50ppm vs Taylor and Spinmaster. My CH seemed super high too but no way of verifying because I don’t have another kit. I think my dropper bottle tops are different and have a bigger hole. I specifically...

I did that last night 2 lbs of Leslie’s PPP powder shock. This morning getting a high level. (3ppm DPD & 5ppm OTO) I may take to pool store to run Spinmaster. I fear my kits are old definitely past expiration. The DPD R-0002 has a pink tint when the drops come out which I believe is a sign...

Unit 4-5 years old 8k hour usage All readings were addressed and perfect (Phos 90, Alk 100, Ph 7.7, cya 60, Cal Hard 200, Salt 3600) I cleaned the cell with acid and rinsed quickly as no visible calcium deposits. all my lights are solid green and tempted to give up and get a new one. my...

I am not getting CL reading. Pentair told me to acid wash cell regardless of scale build up. The cell is 5 years old and on 8k hours so this is a last ditch effort. here are my most recent results. I have been at 100% output for 1 month straight. i have 23k pool and installer put in IC20. It...

I am debating getting the Iph. My installer is against it. He said he has had lots of trouble with them. Any advice on if it’s worth it. I add MA regularly. It’s not hard but you have to stay on top of it. How does it play with EasyTouch, ScreenLogic, IC20 or 40?

Hi guys I contacted Pentair and ScreenLogic Skill should be back up soon.

I just lost mine today been working fine. Anyone have any idea what’s going on with it?