Recent content by jburgert

  1. jburgert

    Aiper Seagull Pro Review

    My S300 actually died this spring after 5 years. It was my first robot and had very little issues. The app for scheduling and driving was a bit painful at times. I hate the cables so was really hoping the Aiper model would do better.
  2. jburgert

    Aiper Seagull Pro Review

    Put in for a return today, hopefully hear back on Monday about a shipping label. Overall it did OK, but had to many missed spots on the floor. I think it is the angled walls, but it seems to go off the wall at slightly off angle and then misses a few inches of floor. So end up after a full...
  3. jburgert

    Aiper Seagull Pro Review

    There is a good amount of dirt at the deep end but it is all dirt and pretty fine, no leaves/twigs. I removed all of the leaves prior. Also the deep end has no sharp corners and is a smooth bowl, but is very deep. The shallow end I can understand it having some issues but my s300 had very...
  4. jburgert

    Polywood Furniture

    I didnt see this thread last summer when I was looking at new furniture, but thought I would post now. Decided on Highwood and had a pretty good experience although a few pieces were tough to screw in. A few curses and a nice afternoon later we ended up with the following. Color was...
  5. 20220701_160910.jpg

    20220701_160910.jpg

  6. jburgert

    Aiper Seagull Pro Review

    Some pictures of progress or lack of progress. I ran a 2nd cycle from full charge today running on floor mode only. Sadly I did not take pictures between the first 2 cycles. Prior to First cycle, Deepend: Prior to First cycle, Shallow (poor picture): After the 2nd Cycle Shallow end...
  7. Start_deepend.jpg

    Start_deepend.jpg

  8. Start_shallow.jpg

    Start_shallow.jpg

  9. Day2_deep.jpg

    Day2_deep.jpg

  10. Day2_shallow.jpg

    Day2_shallow.jpg

  11. Day2_basket.jpg

    Day2_basket.jpg

  12. jburgert

    Aiper Seagull Pro Review

    Ordered on Saturday and was very surprised when it arrived today. No tracking and order still says processing on their website. First run was not great but had in auto mode in a freeform pool and it had a lot of issues tracking, and would not climb walls. It only made it a foot or 2 up the...
  13. jburgert

    Doheny's Discovery, S200, Active20, Triton owners club

    I wanted to let everyone know that I was able to get the rebate from Maytronics for an S300i when ordering from Marina. I received and registered on 5/12 and received my rebate check last night. I think that might be the fastest rebate check I have ever received. Of course your mileage may...
  14. jburgert

    Doheny's Discovery, S200, Active20, Triton owners club

    Just received my S300i from Marina today. Its taking its first pass of the pool and looking very nice.
  15. jburgert

    Upgrading single speed pump to VSP

    Thanks for the feedback everyone. I have them coming out on Thursday to discuss and see what options they are thinking of and decide from there. I have received a quote from another company who worked on the pool for the prior owner, and also did a walkthrough to look for changes (added...