Recent content by Gardog

Good Morning All, I installed my liquidator with my AGP & it works great. I changed all of my hoses to tiger flex hose & the fitting do not leak at all. You have to really tighten the hose clamp around the hose & it will actualy compress the hose just a little bit, but that will let the rubber...

Jet4 Where did you order yours from? I'm looking for somewhere online to order them from. Thanx

Does anyone have the Royal Entrance steps for their pool? I am looking to purchase a new entrance system & really could use some advice. I currently have wedding cake style & I cannot keep the algea from underneath. I have drilled holes in the sides & front to try to improve water circulation...

I went back & put the flow control valve back on the liquidator & what do you know, it works fine. I can turn it to 3 on the valve & get full flow thru the indicator or turn it down to whatever I need. What is the ideal setting on the indicator? I know I will need to check it regularly but...

Update on installation of Liquidator I moved the liquidator up on the deck above the water line & removed the check valve that goes to the pump. I still did not have enough flow pressure to move the ball on the indicator, so I removed the flow control valve & now the ball is up to 3.5. I check...

I'm using clear Tiger Flex. It's solid with a white spiral

I can put the liquidator on the deck above the pool & cover it so the chlorine doesn't dissapate. As far as putting in ball valves, Do I just need to cut the hose coming from the skimmer to the filter on the pump & put on in there & do the same from the filter going to the pool? Thanx Gdog

I checked the flow indicator & the arrow is pointing to the pump, the check valve arrow is pointing to the pump & the flow control valve does not have an arrow. The arrow is pointing to the liquidator on the filter side. Thanx, Gdog

My pump sits directly underneat the skimmer. It's about 2-3ft at the most. I don't think I have a valve between the skimmer & the pump.

I installed the liquidator today, but I do not have enought flow to raise the ball from zero. I have the liquidator about 5ft from the pump & filter. There is flow going thru the tube but has very little pressure. I don't have any leaks at my fittings. I don't know what else to check. I checked...

Just ordered the 8 gallon!!! Hope to install next week Gdog

Thank you very much!!!!! :-D I am ordering the 8 gallon today!!!

I have a AGP approx. 21,000 gallons. Is the 4 gallon ok or do I need the 8 gallon liquidator? Gdog

CWORD, I'm here in Tupelo. Welcome to TFP!!!

Thanx, I'll try it. Gdog