Recent content by ganselmi

As promised. here a couple of pictures of the cell and plumbing, the Compupool unit is supposed to have an internal water fault sensor but it looks like not working as you can see.

The plumbing has been done accordingly to the SWG instructions, the bypass valves are mainly required in case you need to remove the cell, i.e. during the winter I use it in order to remove the cell and keeping the pump running for 1 hour/day. Tomorrow I'll take some picture of plumbing and cell.

This happened to a friend of mine a couple of days ago, but i'd like to share with you his experience. Notwithstanding I clearly have advised him to switch the SWG machine off while backwashing and rinsing the filter, my friend, not only has forgotten it but he also had the great idea to close...

Does Somebody has the procedure to calibrate the compupool?

Since 3 years I personally use an electronic TDS meter Hanna HI96302 with excellent results. From time to time I check his precision by preparing a solution of 3,5 g of salt in a liter of distilled water and checking that the meter shows the expected value, 3500 in my case (sorry for the...

Yeah I've read some thread about the solar rings but the sun discs seems to work differently while coupled through magnets and no needs to inflate. They may have some advantage, easily store and install first but also safety as they should open in case someone (or some pet) will falls down in...

My Kreepy Krauly Legend is able to go through the safety ledge, bu mine is about 10" wide.

Of course you'll get a safer pool using 12v power, I would do it just for it.

1) What pool cleaner do you own? Kreepy krauly Legend new model 2) Do you recommend it to others? DEFINITIVELY YES! very good performances for a good price 3) What does it do really well? Scrubs the bottom, picks up everything from fine debris to leaves & rocks. No problem with corners. Goes...

Does anyone has experience with the solar sun discs? I've tried the search tool within the forum but I was not able to find any topic... Here I've found a comparison but a real user experience would be great. http://www.poolsupplyworld.com/blog/article/Solarsunringsvssolarsundiscscomparison/

I'm not an expert but the impeller, the tires and the whell's ball bearings should be good candidate.

mmh, not sure We are talking of the same cleaner. I was referring to the kreepy krauley legend, it has on the rear side a small water jet that can be adjusted in order to increase the random pattern.

Try adjusting the rear jet it has not to be straight, it has to be "lightly" directed on the right or left (mine prefers the left, I don't know why). I had the same problem and this was the solution, mine works perfectly now while i had the same issue at the beginning. I've also set the jet...