Recent content by Dz7

  1. D

    Do I have ammonia issues?

    If that was true about the added CYA being converted to more ammonia, then wouldn't adding ammonia to your pool be a viable option for lowering CYA levels without draining water?
  2. D

    Black algae cya 60 ppm. FC 72 ppm?

    Is the black algae only on the bottom? Or is it on the sides as well? Did you get a stainless steel brush or are you using a regular nylon or polyester brush?
  3. D

    Aeration / CYA level in SWG pools

    I have two different questions I'm hoping someone can shed light on for me. First is regarding using aeration to raise pH: Is it true that aeration only raises pH up to about 7.5, then has little effect after that? I remember reading that in a post here. If that is true, why do SWG's raise...
  4. D

    Significant PH rise after heavy rain?

    Two things: 1. Aeration from a heavy rain can raise pH, though I doubt that significantly. 2. Most likely culprit is the super chlorinate mode you turned on. pH rise from an active salt cell is significant, especially when the cell is producing chlorine 100% of the pump run time as is the...
  5. D

    Input on advice from Jacks rep?

    Good point.
  6. D

    Input on advice from Jacks rep?

    I talked to a Jacks Magic rep the other day about a staining issue one of my customers was having and he told me something I never thought of, and wonder if there is truth to it. I told him I was having the customer first check to see if the stain was organic by using a trichlor puck and he...
  7. D

    I think I have the start of Black Algae - Black spots on bottom of the pool

    Right. People typically use the granulated version when the problem is more widespread and they don't feel like holding a puck on every spot. Lazy way out.
  8. D

    I think I have the start of Black Algae - Black spots on bottom of the pool

    Pretty sure he means granulated trichlor. Same as rubbing a tab on it, pretty much.
  9. D

    Corrosion question

    There are sprinkler heads right by the equipment and we do live on the west coast. I think you may be onto it.
  10. D

    Corrosion question

    Enclosed in a screen.
  11. D

    Corrosion question

    Customer has no reasoning behind accusations. He just wants compensation. It is an enclosed outdoor pool. PH actually ran in the 7.6-7.8 range while we were looking after it. No telling what happened before we took it over.
  12. D

    Corrosion question

    Over reliance on trichlor and dichlor isn't the problem...it's a salt pool as I stated. Unless the tech was lying about results I assume it was tested correctly although I have no way of knowing for sure. The CYA was tested at 50 1 month prior. Oh actually usually ran high being a salt pool.
  13. D

    Corrosion question

    One of our customers got back from up north and I tested his water. He had a Free Chlorine level of 25 with 0 CYA. I understand this to be extremely harsh and we had the tech that was responsible for maintaining his pool immediately correct the CYA. This is a salt pool mind you. He came back...
  14. D

    Baking Soda and pH

    Why does adding bleach or fresh water cause alkalinity to go UP? I thought that hypochlorous acid, produced by adding sodium hypochlorite, pretty much cancelled out the high pH of the sodium hypochlorite? Isn't it pretty much a pH neutral event? Also, adding fresh water only raises alkalinity...
  15. D

    new pool

    SLAM. FC probably dropped below minimum target temporarily at some point.