Recent content by DSK

So I finally got mine from the kick starter about 3 weeks ago. It’s been in the water since and seems to do a good job but I have problems connecting to it and it says they there is an update on the app but it never seems to update. My pool season is about done so I will have to see if it turns...

I would start at the wall outlet from the booster pump. Make sure the pressure coming out is good when booster pump is up running. If that’s seems good check the connectors and the Little mesh baskets line the lines. Also there is that blow Off spring part right there at the wall that may be...

Look my Polaris 380 must have heard me taking about replacing it next season and got up all this.

I’m not sure it matters but I did turn it around.

I decided to have my install face down considering I had the room. I put the flow sensor 1st so the water would hit it from above. I am currently running off the 120v plug to a timer. I think next season I’ll may replace my Polaris 380 and booster pump with a robot and convert the SWG back to...

But I bet you can walk across the pool without getting wet.

Wow that look s great. I just completed piecing together a vertical setup and I got purple spots everywhere. I haven’t actually installed it yet. I was thinking of running power off VS pump, that means the SWG will always have power and the flow switch will be the on/off only, is that ok to do...

When Adding a 40lb bag of salt to your pool, you need to take it out of the bag...... apprently. It’s not mixing to well this way Can’t

It’s all fun and games until the robots achieve awareness.

I was looking at the edge 40, are you finding you have to run it high for your needs? I think at the point the RJ45 Plus is what I will get. I will be removing the chlorinator but don’t want to redo all the pipes yet. I may get rid of booster pump next year and go with a robot and at that...

Thanks I looked at the write up, Well done. I understand about what you mean about putting it on the blue pipe. Looking at your set up I may be able to squeeze it in there together on the red pipe but I also see the vertical install Option for tight places. I could do that as well an be done...