Recent content by drg

....don't worry u will love it might even be able to surf now :lol:

Not sure on the oval but on circle pool the foam is placed inside of the walls then a foam cove on top of that then the liner, basically what it does is replace the 1 1/2 sand base that is used under the liner

You won't use the plastic coping pieces , those are used for overlap liner to hold that particular type of liner onto the wall...so if you have just the snap liner connected to the top of wall , the stab bars should fit over that provided your not try to use the plastic coping also

Looking at the pics, it looks like you use the bars on top of the liner....top that with top rails ....if you ever have to replace liner ,you just reach up under top rail and unhook the liner from the track, and install new liner in the track without having to remove top rail and top stabilizer bar

Go to sep 10 and read the rest...http://www.propools.com/instructions_ow ... ctions.pdf

Thanks or the reply, and its lookin good :party:

Couple of questions, I see the pool is sitting on turf that is surrounded by border wall blocks ,is that correct? If so did you fill the area inside the border wall with something and then put the turf on top of that?...and are there pavers under the turf?

Great pics, got a quick question....I see you replaced the original pump with a Hayward model, was there a reason for changing out the original? I like that idea

Not trying to be a smart --- but is there a drain plug not capped or closed

Dig 6 inches under where paver will go, put a compactablele base ( crusher run or what ever its called out there) put 2 inch layer at a time,slightly dampen it, and compact it with a hand tamper. Repeat until flush with ground and top it with the paver. Should solve ur issue

It looks like you have a general idea where the pavers go, once the pool starts filling u can adjust the legs so they are more straight up and down. Also as the pool fills the legs will tend to move out, so take that in consideration on placement of pavers. Just monitor the filling and adjust...

Got to thinking about this ( yeah I know that's a bad idea) part of the framing will over lap where the old pool was, hence no topsoil just a dirt round circle. I'm wondering if the pack gravel over that area will continue to sink down into the the dirt, and should I remove all the grass in the...

Going to put up a intex 18 x52 ultra. Now the question is this...I would like to build a 22x22 frame using 6x6 post for the frame. Inside of the frame use crusher rock, compacted to one inch of the top of the frame. Put 1 inch foam on top of the crusher rock along with the pavers, and place...

I aslo run my fc at the higher end of the scale to give me a little cushion on changing conditions :party:

Ditto on the 50% loss..here in kc in order for me to have a 5fc at the end of the day, I have to bring it up to 11 at night so that the end of the next day it is around 5 again....I think im running around 40cya...These HOT summer days really zaps the fc during the day