Recent content by dbrew

As I'm looking at my profile I see my old pump might have been Hayward 1.85hp whereas this new one is 2.70hp. Is it tripping because it's too much power?

Pool was opened Tues, 4/25. On Wed, 4/26 I emailed the pool service company that the filter was not running and asked if they merely open or turn on all automation. Only after my email was I told the technicians noted I needed a new actuator. The next day when technicians came back they told me...

Well I have learned a lot the last 2 days. I believe the cam position was set that way by design. Since my pool was installed it was either always in spillover mode or spa mode. On the Hayward display it would only toggle between 'Pool' or 'Spa' but 'Pool' always had that spillover effect. Using...

Thank you so much Allen! Here's what I found depending on the position of both actuator toggle switches: Pic#1 - both toggle switches ON2 set to Spillover Pic#2 - both toggle switches ON2 set to Pool Pic#3 - both toggle switches ON2 set to Spa I turned off the pool and turned both toggle...

Yes I'm pretty sure the actuator is not in the right position. The first pic is the valve positions when the pool was opened and this is the position in Spillover mode. When I switched to Spa mode only the valve closest to the filter turned to point directly at the filter. The other value didn't...