Recent content by daveva

Thinking about putting a float in my skimmer for an automatic pool filler. Anyone ever done this and if so how. Really don't care for the over the rail fillers. Thanks

CYA level is 60. it is the 1400 also thanks for your help

You know you’re right The CYA is high

It’s a 1400. The thing that puzzles me is that last year it maintained about it 2.0 chlorine set at 30%. Now I’m almost 4.7 to 5.0 at 30%.

I don't know if this is trouble but it came to my attention that my salt water generator is over producing chlorine. My salt content is 2.9. The salt content is checked by a Taylor pool test kit. Also the Aqua pure is set a 30%. I have turned it off temporarily to lower the chlorine. Any...

Never mind I found it. Hold the temperature button for 10 seconds

How can I get the Jandy system out of boost mode. Accidentally put in boost mode doesn't need to be

OK and thank you for your time It’s much appreciated

Well never thought about doing that. Just went and tried and yes they do

I have the one touch

through the iAqualink app. The light is connected to the jandy control system yes 2 years one

This light will turn on to Alpine white but will not cycle to desired color.

I guess I'll learn. Yes, but the old board didn't work with the new 1400. I did solder it back together but I suspect that it was my trouble all the time. New board coming Wednesday from reputable dealer. Thanks

Just performed the test . The second test failed. Trisenor is new. The board is new to. looks like a return on the board

If there is a high salt reading will the generator still produce chlorine. Or does it shut off to keep it from harm due to the high salt?