Recent content by darrylph

Well I tried using a bladder from the pump to skimmer and t vacuum port all was clear. Tried a15 ' snake from MD and It went the full length without touching anything. Will have to let it go and just use a auto pool cleaner. Sent from my iPhone using Tapatalk

Here is a picture of the Skimmer, the pool drain that I took the cover off and found the debris and if I prop open the side vacuum port the pump works correctly. I have no idea if the MD was intentionally closed somewhere or how to try and open it if stopped up. Thanks for any ideas or...

I will add picture of Skimmer and Main Drain in a few hours, thanks.

My skimmer has two holes but the one closest to the pool has a plug in it, I do not know if it is plumbed in or even if the plug is removable or not.

Main drain had debris inside under the cover. Removed cover and say nothing other than small particles of dirt, leaves etc. My pump has two inlets one from the skimmer and one from the vacuum port. Therefore I do not know how the MD is plumbed into the system. I can turn the valve completely...