Recent content by D Chadwick

Had a new liner installed. When beauty strips reinstalled on the steps I realized the end caps were in very poor condition. Steps are 20 years old and cannot find replacements. Can anyone recommend a supplier or alternative. Attached are images of old cap. Thanks

Hi Jim The cell has been cleaned both using just fresh water and water and Muriatic acid. The cell is T15 using software version 1.58. I found that when generating the Cell's voltage was 26.3 volts and the amps were 5.02. When not generating the voltage was 35.2 volts and 0 amps. I do...

The Cell is probably close to 5 years old. I am having to reset the machine daily as it is indicating low salt and check cell. I have had my water checked at the pool store and they are telling me the salt level is actually around 3600 ppm. They say I need to backwash to bring the salt level...

I currently need to replace my salt cell which is a T15 and was installed with the system. My pool holds 17,700 US Gallons. Can I replace with a T9 cell? I noticed that the T15 is for pools 40,000 and the T9 is for pools up to 25,000 gallons. Thanks

It appears to be working and producing FC. I had it checked when I had the salt level checked. I will keep my eye on it and see if I can drag out another couple of months from it. Do you know what the signs are that the circuit board is have problems except when the unit shuts down...

I have a salt system that has just recently started giving me concern. I felt that I had put to much salt in the pool but my reading didn't seem to be moving. I came home the other day and I had low salt and check cell light flashing. Had water tested at pool store and reading was 5000 ppm...